| Resource |
Links
|
Description |
| 2001-11-20 |
| App Notes |
|
+23dBm PA and PA Predriver with 37% Efficiency for 2.4GHz FHSS WLAN Applications
|
| 2001-11-19 |
| App Notes |
|
Specifying Quartz Crystals
|
| 2001-11-14 |
| App Notes |
|
RF ICs for 3.5GHz WLL Transceivers
|
| 2001-09-26 |
| App Notes |
|
REP031: MAX3509 Upstream Amplifier Drives +68dBmV DOCSIS Cable Telephony
|
| App Notes |
|
Measured Loading Speed of Maxim's Serial Interface Software
|
| 2001-09-07 |
| App Notes |
|
REP029: MAX3510 Cable Upstream Amplifier Harmonic Distortion Performance to 55MHz
|
| App Notes |
|
REP028: MAX2251 Cellular (Linear) RF PA Performs Well in AMPS FM Operation
|
| App Notes |
|
MAX2338 LNAs and Downconverters Optimized for GSM Front-End (REP027)
|
| 2001-08-29 |
| App Notes |
|
Passive Differential IF Filters for the MAX2360/61 Transmitter ICs
|
| 2001-08-27 |
| App Notes |
|
CATV Upstream Amplifier Selection Guide
|
| 2001-08-20 |
| App Notes |
|
QuickChip Design Example 2
Low Power Silicon BJT LNA for 1.9GHz
|
| App Notes |
|
QuickChip Design Example 1 - A Silicon Bipolar Broadband PLL Building Block Integrated Circuit
|
| 2001-08-01 |
| App Notes |
|
Circuit Enables PCs to Communicate via IrDA
|
| 2001-06-01 |
| App Notes |
|
LNA Optimized for GPS (REP024)
|
| App Notes |
|
RF IC Building Block Solutions for GPS
|
| App Notes |
|
REP025: Custom-Tuned LNA at 345MHz for Wireless Security System
|
| 2001-05-01 |
| App Notes |
|
Block Diagram for MAX3510 Upstream CATV Amplifier Application
|
| App Notes |
|
Block Diagram for a Radio Design Solution for a Satellite ISP Application
|
| 2000-12-07 |
| App Notes |
|
REP012: Cellular LNA Achieves +20dBm IIP3 in Low-Gain High-Linearity Mode
|
| App Notes |
|
REP019: Tuned Dual-Band Front-End CDMA IC with Single 110MHz IF
|
| 2000-11-01 |
| App Notes |
|
REP022: 3.5GHz RF Upconverter from 900MHz Achieves 5dB Gain and 5dBm IIP3
|
| App Notes |
|
REP007: Cellular Front-End IC Drives IFR3100 IF Demodulator
|
| App Notes |
|
REP016: Dual-Band Front End for Japanese Cellular CDMA at 110MHz IF
|
| App Notes |
|
REP017: Dual-Band Triple-Mode IC Uses 183MHz for Both CDMA and AMPS IFs
|
| App Notes |
|
REP018: Dual-Band Dual-Mode FE IC with Common 183.6MHz IF
|
| App Notes |
|
REP021: Front End for 2.5GHz GlobalStar +IS-95
|
| App Notes |
|
REP009: Cellular PA Has Good TDMA Results in Small PCB Layout Area
|
| App Notes |
|
REP008: Dual-Band Front-End IC Tuned for CDMA, PCS, and AMPS at a Common 85MHz Low IF
|
| App Notes |
|
REP001: AMPS FM Mixer Trades Off IIP3 for Gain
|
| App Notes |
|
REP005: Tuned Front End for Dual-Band CDMA for Use with Low-Cost 85MHz IF SAWs
|
| App Notes |
|
REP003: Cellular Front-End IC in Automobile Application
|
| App Notes |
|
REP002: Dual-Band IS136 TDMA RF Front-End Application
|
| App Notes |
|
REP006: Linear RF Power Amplifier Matched for High Efficiency at Low Power
|
| App Notes |
|
REP023: 3.5GHz Upconverter from 350MHz Achieves 9dB Gain and 1.3dBm IIP3
|
| App Notes |
|
REP020: Dual-Band Dual-Mode FE IC with Common 210MHz IF
|
| 2000-09-01 |
| App Notes |
|
MAX2721 Direct-Frequency Upconverter Minimizes Chip Count and Is Ideal for Wideband Application
|
| App Notes |
|
The MAX2269 Power Amplifier for the Japanese CDMA Cellular Band with the PIN Diode Switch
|
| App Notes |
|
The MAX2322 Used in WCDMA Applications
|
| App Notes |
|
MAX2266 Power Amplifier for the CDMA Cellular Band with PIN Diode Switch
|
| 2000-07-01 |
| App Notes |
|
Split IF Application for Dual-Band Single-Mixer ICs
|
| 2000-03-31 |
| App Notes |
|
A Single Chip Silicon Bipolar Receiver for GPS/GLONASS Applications
|
| 2000-03-13 |
| App Notes |
|
Semicustom QuickChip ASICs Implement RF Functions to 9GHz
|
| 1998-04-01 |
| App Notes |
|
Crystal Oscillator Has Dual or Differential Outputs
|
