| Resource |
Links
|
Description |
| 2009-05-25 |
| App Notes |
|
Continuous-Wave Doppler (CWD) Design Challenges in Compact Ultrasound-Imaging Equipment
|
| 2009-05-19 |
| App Notes |
|
Square-wave Oscillator Includes No External Components
|
| App Notes |
|
Vacuum-Fluorescent-Display (VFD) Tube Manufacturers' Web Sites
|
| 2009-05-14 |
| App Notes |
|
Modulo Exponentiation Timing with the DS5250 Microcontroller
|
| App Notes |
|
A Single-Chip Personal Alarm
|
| 2009-05-11 |
| App Notes |
|
HFAN-04.5.5 Characterizing Power-Supply Noise Rejection in PLL Clock Synthesizers
|
| 2009-05-05 |
| App Notes |
|
Reference Design for a 3S3P Rear Combination Lamp (RCL) LED Driver
|
| 2009-04-29 |
| App Notes |
|
Reference Design for a High-Current Power Supply with Lossless Current Sensing Using the MAX5060
|
| App Notes |
|
Three Approaches to Creating Negative Low-Voltage Hot-Swap Circuits
|
| 2009-04-17 |
| App Notes |
|
MAX6960 Programming Guide for Large LED Displays
|
| 2009-04-15 |
| App Notes |
|
Reference Design Using the MAX15026 for an Auxiliary Power Supply for LCD TVs or Set-Top Boxes
|
| 2009-04-13 |
| App Notes |
|
Ultra-Low Quiescent-Current Linear Regulator for Automotive Air Bags
|
| 2009-04-10 |
| App Notes |
|
Designing an LED-Based Video-Display Board
|
| 2009-04-09 |
| App Notes |
|
Autozero Noise Filtering Improves Instrumentation Amplifier Output
|
| 2009-04-08 |
| App Notes |
|
I'm OOK. You're OOK?
|
| App Notes |
|
Surge Testing Solid-State USB Switches and Other Overcurrent Protectors
|
| App Notes |
|
Protect Current-Sense Amplifiers Against Overvoltage Transients
|
| 2009-04-06 |
| App Notes |
|
Zero-Drift Instrumentation Amplifier (IA) Takes the Strain out of Sensor Measurements
|
| App Notes |
|
Improve Stereo Performance with Active Biasing
|
| 2009-04-03 |
| App Notes |
|
Implement Master-Slave Timing-Card Redundancy Using Maxim Timing ICs
|
| 2009-03-31 |
| App Notes |
|
Power Supply and Accurate Current Monitor for Avalanche Photodiode (APD) Biasing Applications
|
| 2009-03-27 |
| App Notes |
|
How to Replace a DS1213 SmartSocket with an Equivalent-Density NV SRAM Module
|
| 2009-03-26 |
| App Notes |
|
Vacuum Fluorescent Display (VFD) Reference Design for Automotive Applications
|
| App Notes |
|
Implementing an Eight-to-One USB Switch for KVM Applications
|
| 2009-03-23 |
| App Notes |
|
Switching VGA Signals in a Notebook
|
| App Notes |
|
Display Different LED Sequences Using the MAXQ2000 Microcontroller with the MAX6970 LED Driver
|
| 2009-03-19 |
| App Notes |
|
Reduce Standby Power Drains with Ultra-Low-Current, Pulse-Frequency-Modulated (PFM) DC-DC Converters
|
| App Notes |
|
Reference Design Ensures Dynamic Output Voltages for a Print-Head Power Supply
|
| 2009-03-18 |
| App Notes |
|
Calculating Energy Usage: How Costs Drive Conservation
|
| App Notes |
|
ResourceSmart™ (Green) Information for Design Engineers
|
| App Notes |
|
Comparison of the DS18B20 and DS18S20 1-Wire® Digital Thermometers
|
| 2009-03-17 |
| App Notes |
|
Reference Design for Switching VGA Signals in a Laptop
|
| 2009-03-11 |
| App Notes |
|
OneWireViewer and iButton® Quick Start Guide
|
| 2009-03-04 |
| App Notes |
|
Selecting HB LED Drivers for Automotive Lighting Applications
|
| 2009-03-03 |
| App Notes |
|
Design Guidelines for High-Performance, Multichannel, Simultaneous-Sampling ADCs in Data-Acquisition Systems (DAS)
|
| 2009-02-27 |
| App Notes |
|
Keep Power Consumption in Check with Low-Power Comparators that Autosense Plugged-In Accessories
|
| App Notes |
|
Reference Design for a Class-D, 2.1 Channel, Audio Amplifier for an MP3 Player Docking Station
|
| 2009-02-10 |
| App Notes |
|
Robust Contact Monitor Simplifies Design of Body Control Computers
|
| 2009-02-05 |
| App Notes |
|
Display Backlighting Using High-Brightness LEDs and SEPIC Power Modules
|
| 2009-02-04 |
| App Notes |
|
Leveraging Nonvolatile Memory Services in MAXQ® Processors
|
| 2009-01-28 |
| App Notes |
|
How to Prevent Flicker Caused by Burst Dimming
|
| 2009-01-20 |
| App Notes |
|
Programming 10-Bit Gamma Registers on the DS3514
|
| 2009-01-06 |
| App Notes |
|
Negative Charge Pumps Achieve Inductor-Like Efficiency for WLED Backlights
|
| 2008-12-24 |
| App Notes |
|
PMU Mode Operation for the MAX9979 Pin-Electronics IC
|
| 2008-12-23 |
| App Notes |
|
Design Challenges for an Ultra-Low-Jitter Clock Synthesizer
|
| App Notes |
|
An Efficiency Primer for Switch-Mode, DC-DC Converter Power Supplies
|
| 2008-12-22 |
| App Notes |
|
Cable-Loss Solutions
|
| 2008-12-19 |
| App Notes |
|
Precision Instrumentation Amplifiers with Rejustors Solve High-Gain Applications
|
| App Notes |
|
Well Grounded, Digital Is Analog
|
| App Notes |
|
Rail Splitter, from Abraham Lincoln to Virtual Ground
|
| App Notes |
|
RSA Key Generation Using the MAXQ1103 Microcontroller
|
| 2008-12-17 |
| App Notes |
|
Designing the DS2726 to Protect Li+ Batteries During a Reverse Charger Event
|
| App Notes |
|
How to Use the DS2482 I²C 1-Wire® Master
|
| 2008-12-15 |
| App Notes |
|
Unbalanced Twisted Pairs Can Give You the Jitters!
|
| App Notes |
|
Trends in High-Performance Power-Supply Design for Automotive Infotainment
|
| 2008-12-12 |
| App Notes |
|
Transmit Pulse Control on the DS26518 T1/E1/J1 Transceiver
|
| 2008-12-11 |
| App Notes |
|
Pots, Pans, Logs, and Linear Digital Pots Create Arbitrary Voltage Curves
|
| App Notes |
|
How to Use the MAX15005 Current-Mode Controller as a Boost Circuit for an Automotive Cold-Crank Condition
|
| 2008-12-10 |
| App Notes |
|
Simplified Lithium-Ion (Li+) Battery-Charger Testing
|
| 2008-12-09 |
| App Notes |
|
HFRD-39.0: 40Gbps, Quad-SFP Half-Active Copper Cable Assembly
|
| 2008-12-01 |
| App Notes |
|
How to Configure the DS89C430 Dual Serial Ports with Different Timers Using the Keil C Compiler
|
| App Notes |
|
Reading Temperature Using the MAXQ2010 Evaluation Kit
|
| App Notes |
|
Video Display Signals and the MAX9406 DP-HDMI/DVI Level Shifter—Part II
|
| 2008-11-26 |
| App Notes |
|
HFRD-29.7: Multirate (1Gbps to 10.3125Gbps) VCSEL SFP+ Transceiver
|
| 2008-11-12 |
| App Notes |
|
Using a Margining Oscillator as a Spread-Spectrum Clock Generator
|
| 2008-11-07 |
| App Notes |
|
Getting Started with the MAXQ610 Evaluation Kit (EV Kit) and the IAR Embedded Workbench
|
| App Notes |
|
In-Circuit Programming of the MAX16031/MAX16032 EEPROM-Based System Monitors
|
| App Notes |
|
In-Circuit Programming for the MAX16046–MAX16049 EEPROM-Programmable System Managers
|
| 2008-11-06 |
| App Notes |
|
Capacitor Type Selection Optimizes PC Sound Quality for Windows Vista Audio Requirements
|
| 2008-11-03 |
| App Notes |
|
How to Add Margining Capability to a DC-DC Converter
|
| 2008-10-17 |
| App Notes |
|
Getting Started with the MAXQ1850 Evaluation Kit (EV Kit) and the CrossWorks Compiler for the MAXQ30
|
| 2008-10-06 |
| App Notes |
|
A Filter Primer
|
| 2008-09-29 |
| App Notes |
|
Impact of Cable Losses
|
| 2008-09-27 |
| App Notes |
|
How to Calculate the Wiper Voltage of a Digital Potentiometer
|
| 2008-09-26 |
| App Notes |
|
Video Display Signals and the MAX9406 DP-HDMI/DVI Level Shifter—Part I
|
| App Notes |
|
FDL Network Loopback Support Using TDMoP Devices
|
| App Notes |
|
High-Speed I²C for the MAX1239 ADC Using the MAXQ2000 Microcontroller
|
| 2008-09-25 |
| App Notes |
|
Switching LVDS Graphics in a Laptop Computer
|
| App Notes |
|
Calculating the Error Budget in Precision Digital-to-Analog Converter (DAC) Applications
|
| App Notes |
|
Overview of the MAX11040 24-Bit Simultaneous-Sampling, Sigma-Delta ADC
|
| App Notes |
|
Where Is Ground?
|
| 2008-09-24 |
| App Notes |
|
External Temperature Sensor Calibration for the MAX16031/MAX16032 System Monitors
|
| App Notes |
|
Stack References for Higher Adjustable Voltages from a Digital Pot
|
| App Notes |
|
Getting Started with the MAXQ2000 USB Thumb Evaluation Kit
|
| 2008-09-23 |
| App Notes |
|
Small Antennas for 300MHz to 450MHz Transmitters
|
| App Notes |
|
DVB-T Receiver Reference Design with the MAX3580
|
| App Notes |
|
Ratiometric Design Overcomes the 25% Tolerance of a Digital Potentiometer
|
| 2008-09-22 |
| App Notes |
|
MAX2769 GPS Reference Design
|
| App Notes |
|
Getting Started with the MAXQ1103 Evaluation Kit and the CrossWorks Compiler for the MAXQ30
|
| App Notes |
|
Using the DS4424 to Margin the Output Voltage of a DC-DC Converter
|
| App Notes |
|
Constructing a Pushbutton Interface for the DS1845/DS1855 Digital Potentiometers
|
| App Notes |
|
Providing Additional Low-Frequency Rejection with the MAX2659 GSP Low-Noise Amplifier (LNA)
|
| App Notes |
|
Software Methods to Achieve Robust 1-Wire® Communication in iButton® Applications
|
| App Notes |
|
Guidelines for Reliable Long Line 1-Wire® Networks
|
| 2008-09-18 |
| App Notes |
|
WLAN Reference Design with the MAX2830
|
| App Notes |
|
Reconstructing Analog Video with the Maxim Video Filter Family
|
| App Notes |
|
Measuring and Calibrating for Product-Dependent Temperature Offsets
|
| 2008-09-17 |
| App Notes |
|
Battery Selection for Secure Supervisor Applications
|
| 2008-09-16 |
| App Notes |
|
Measuring Temperature with the MAX1358 Data Acquisition System
|
| 2008-09-15 |
| App Notes |
|
Automotive Infotainment Goes Mainstream: High-Integration Solutions Enable Value-Added Features
|
