| Resource |
Links
|
Description |
| 2009-11-06 |
| App Notes |
|
Layout Guidelines with Example Layout for the MAX16922 PMIC
|
| 2009-11-04 |
| App Notes |
|
Reference Design for a High-Input-Voltage, High-Output-Current Buck Controller Using the MAX15046
|
| 2009-10-28 |
| App Notes |
|
Choosing the Right Power-Supply IC for your Application
|
| 2009-10-27 |
| App Notes |
|
Constant-Power Source
|
| 2009-10-16 |
| App Notes |
|
Simple Circuit Prevents USB Current Overshoot During Insertion
|
| 2009-09-28 |
| App Notes |
|
Rail-to-Rail: Railroading and the Electronics of Op Amps
|
| App Notes |
|
Improve Two-Phase Buck Converter Performance with a Coupled-Choke Topology
|
| 2009-09-25 |
| App Notes |
|
Overview of 2.1 (Satellite/Subwoofer) Speaker Systems
|
| 2009-09-21 |
| App Notes |
|
Inexpensive (Almost Free) Probe/Tweezers for Testing SMD Components
|
| 2009-09-16 |
| App Notes |
|
Boost Converter Switches Between Battery and USB Power
|
| 2009-09-11 |
| App Notes |
|
Single-Pushbutton ON/OFF Power Control
|
| 2009-08-27 |
| App Notes |
|
Power Supply Features Low VIN and VOUT
|
| 2009-08-18 |
| App Notes |
|
USB-Powered Bipolar Supply
|
| 2009-08-06 |
| App Notes |
|
Transceiver IC Generates ±30V
|
| 2009-07-27 |
| App Notes |
|
Boost Backlight LED Driver
|
| 2009-07-22 |
| App Notes |
|
DC-DC Conversion Without Inductors
|
| 2009-07-07 |
| App Notes |
|
6A RGB LED Driver Reference Design for a Portable Projector
|
| App Notes |
|
Reference Design for a Signal-Lamp LED Driver
|
| 2009-06-30 |
| App Notes |
|
SEPIC Backlight LED Driver
|
| 2009-06-29 |
| App Notes |
|
Reference Design for a 5S2P AR111 Lamp LED Driver
|
| App Notes |
|
MR-16 LED Driver with a 5V Auxiliary Output to Power a Pulsating LED Cooler
|
| 2009-06-25 |
| App Notes |
|
Offline LED Driver Reference Design
|
| 2009-06-23 |
| App Notes |
|
Low-Loss LED Driver Improves a System's Green Footprint by Boosting Efficiency and Extending Battery Life
|
| 2009-06-03 |
| App Notes |
|
Using a Linear Regulator to Produce a Constant Current Source
|
| 2009-05-27 |
| App Notes |
|
Understand Thermal Derating Aspects of PWM ICs to Ensure the Best System Performance
|
| 2009-05-05 |
| App Notes |
|
Reference Design for a 3S3P Rear Combination Lamp (RCL) LED Driver
|
| 2009-04-29 |
| App Notes |
|
Reference Design for a High-Current Power Supply with Lossless Current Sensing Using the MAX5060
|
| 2009-04-15 |
| App Notes |
|
Reference Design Using the MAX15026 for an Auxiliary Power Supply for LCD TVs or Set-Top Boxes
|
| 2009-04-13 |
| App Notes |
|
Ultra-Low Quiescent-Current Linear Regulator for Automotive Air Bags
|
| 2009-04-08 |
| App Notes |
|
Surge Testing Solid-State USB Switches and Other Overcurrent Protectors
|
| 2009-03-31 |
| App Notes |
|
Power Supply and Accurate Current Monitor for Avalanche Photodiode (APD) Biasing Applications
|
| 2009-03-26 |
| App Notes |
|
Vacuum Fluorescent Display (VFD) Reference Design for Automotive Applications
|
| 2009-03-19 |
| App Notes |
|
Reduce Standby Power Drains with Ultra-Low-Current, Pulse-Frequency-Modulated (PFM) DC-DC Converters
|
| App Notes |
|
Reference Design Ensures Dynamic Output Voltages for a Print-Head Power Supply
|
| 2009-03-18 |
| App Notes |
|
Calculating Energy Usage: How Costs Drive Conservation
|
| App Notes |
|
ResourceSmart™ (Green) Information for Design Engineers
|
| 2009-01-06 |
| App Notes |
|
Negative Charge Pumps Achieve Inductor-Like Efficiency for WLED Backlights
|
| 2008-12-23 |
| App Notes |
|
An Efficiency Primer for Switch-Mode, DC-DC Converter Power Supplies
|
| 2008-12-17 |
| App Notes |
|
Designing the DS2726 to Protect Li+ Batteries During a Reverse Charger Event
|
| 2008-12-11 |
| App Notes |
|
How to Use the MAX15005 Current-Mode Controller as a Boost Circuit for an Automotive Cold-Crank Condition
|
| 2008-12-10 |
| App Notes |
|
Simplified Lithium-Ion (Li+) Battery-Charger Testing
|
| 2008-11-03 |
| App Notes |
|
How to Add Margining Capability to a DC-DC Converter
|
| 2008-09-27 |
| App Notes |
|
How to Calculate the Wiper Voltage of a Digital Potentiometer
|
| 2008-09-25 |
| App Notes |
|
Where Is Ground?
|
| 2008-09-24 |
| App Notes |
|
Stack References for Higher Adjustable Voltages from a Digital Pot
|
| 2008-09-23 |
| App Notes |
|
Ratiometric Design Overcomes the 25% Tolerance of a Digital Potentiometer
|
| 2008-09-22 |
| App Notes |
|
Using the DS4424 to Margin the Output Voltage of a DC-DC Converter
|
| 2008-08-01 |
| App Notes |
|
Creating a Fast Load Transient
|
| 2008-06-20 |
| App Notes |
|
Active High-Voltage Transient Protectors Trump Conventional Approaches in Automotive Electronics
|
| 2008-06-18 |
| App Notes |
|
Secure Supervisors Provide Multifaceted Monitoring to Ensure System Security
|
| 2008-06-05 |
| App Notes |
|
Comparison of Internal and External Watchdog Timers
|
| 2008-05-12 |
| App Notes |
|
HFRD-34.0 4 x 4 DVI KVM Switch
|
| 2008-05-07 |
| App Notes |
|
Protection Circuitry for Reversed Charger Connections to the DS2784 High-Side nFET Protector
|
| 2008-05-06 |
| App Notes |
|
Using the DS2786 Battery Fuel Gauge in the Host Side of a 2-Cell Battery Application
|
| 2008-03-28 |
| App Notes |
|
Estimating Switching Speed for the DS2712 NiMH Battery Charger
|
| 2008-03-27 |
| App Notes |
|
Estimating Switching Speed for the DS2715 NiMH Battery Charger
|
| 2008-03-26 |
| App Notes |
|
Adding Thermal Protection to the DS2784 Stand-Alone Fuel Gauge
|
| 2008-03-20 |
| App Notes |
|
Simplify the Design of 1-Cell Li+ Battery-Operated Devices
|
| 2008-03-14 |
| App Notes |
|
Optimizing the Load-Switch Function of the DS2715 Battery-Charger IC
|
| 2008-03-10 |
| App Notes |
|
Characterizing a Lithium-Ion (Li+) Cell for Use with an Open-Circuit-Voltage (OCV) Based Fuel Gauge
|
| App Notes |
|
Calibrating the Current Offset Bias (COB) Register for the DS278x Family of Fuel Gauges
|
| 2008-03-07 |
| App Notes |
|
Understanding Li+ Battery Operation Lessens Charging Safety Concerns
|
| 2008-02-21 |
| App Notes |
|
Addressing the Physical Security of Encryption Keys
|
| 2007-12-21 |
| App Notes |
|
Reference Design Using the MAX5066 for a High Performance Application
|
| App Notes |
|
Using the MAX15005 Supply and Driver for an LED Application
|
| 2007-11-26 |
| App Notes |
|
Programming and Testing a DS2786-Based Circuit
|
| 2007-11-16 |
| App Notes |
|
Power Supplies for Next-Generation Automotive Lighting
|
| 2007-09-27 |
| App Notes |
|
SPST Bipolar Power Switch Simplifies Power-Supply Testing
|
| App Notes |
|
An Introduction to Switch-Mode Power Supplies
|
| 2007-09-25 |
| App Notes |
|
Replace Inefficient MR16 Halogen Lamps with LEDs
|
| 2007-09-11 |
| App Notes |
|
Calibrating RSGAIN for the DS278x Family of Fuel Gauges
|
| 2007-09-04 |
| App Notes |
|
Using the DS2786 Battery Fuel Gauge in a 2-Cell Battery Pack
|
| 2007-08-16 |
| App Notes |
|
Storing Fuel Gauge Parameters in the DS2784
|
| 2007-08-06 |
| App Notes |
|
Alternate Circuits for Overvoltage Protection: Tips and Tricks
|
| 2007-07-30 |
| App Notes |
|
Thermal Characterization of IC Packages
|
| 2007-07-25 |
| App Notes |
|
Communication Flowchart for the DS2703
|
| 2007-07-18 |
| App Notes |
|
Understanding the DS2784's Undervoltage-Protection Delay (tUVD)
|
| 2007-07-17 |
| App Notes |
|
High-Frequency Automotive Power Supplies
|
| 2007-06-18 |
| App Notes |
|
Using the DS4402/DS4404 to Margin the Output Voltage of a DC-DC Converter
|
| 2007-06-01 |
| App Notes |
|
User's Guide to the DS28DG02
|
| 2007-05-29 |
| App Notes |
|
MAX8660/MAX8661 PCB Layout Guide
|
| 2007-03-26 |
| App Notes |
|
Overview of Rechargeable Batteries and Fast Stand-Alone Chargers
|
| 2007-03-20 |
| App Notes |
|
Designing Single-Switch, Resonant-Reset, Forward Converters
|
| 2007-02-13 |
| App Notes |
|
Interpreting the Open-Circuit-Voltage (OCV) Fuel Gauge of the DS2786
|
| 2007-02-12 |
| App Notes |
|
Getting Started with the DS2786K
|
| App Notes |
|
Inductor Choice Yields Performance Tradeoffs in DC-DC Converters
|
| 2007-02-09 |
| App Notes |
|
Automotive Linear Regulators Minimize Quiescent Current
|
| 2007-01-31 |
| App Notes |
|
Class D Amplifiers: Fundamentals of Operation and Recent Developments
|
| 2006-12-22 |
| App Notes |
|
Battery Fuel Gauges: Accurately Measuring Charge Level
|
| 2006-12-15 |
| App Notes |
|
Using an nMOS Transistor with the DS2714
|
| 2006-12-13 |
| App Notes |
|
MAX8632 PCB Layout Optimization
|
| 2006-12-07 |
| App Notes |
|
±15V or ±12V Output Switch-Mode Power Supply Has Wide Input-Voltage Range
|
| 2006-11-22 |
| App Notes |
|
DC-DC Controllers Use Average-Current-Mode Control for Infotainment Applications
|
| 2006-11-16 |
| App Notes |
|
Avalanche-Photodiode Detector Circuit Limits Current to 1mA and Improves Transient Response
|
| 2006-11-02 |
| App Notes |
|
The Maxim USB Laboratory
|
| 2006-09-11 |
| App Notes |
|
Simple Characterization Circuit for Rechargeable AA Cells
|
| App Notes |
|
Using the DS2746 to Identify a Battery-Pack Based on an Identification Resistor
|
| 2006-07-25 |
| App Notes |
|
The FET-OR Connection for Power Supplies
|
| 2006-07-19 |
| App Notes |
|
Single Resistor Provides Extra Current from a Linear Regulator
|
| 2006-06-23 |
| App Notes |
|
Improving Accuracy of the MAX1737 Lithium-Ion Battery Charger
|
