| RESOURCE |
LINKS |
DESCRIPTION |
| 2008-05-08 |
| App Notes |
AN
|
Minimizing Shutdown Current in the MAX9877 Audio Subsystem IC
|
| 2008-05-07 |
| App Notes |
AN
|
MAX2165 DMB-TH USB Dongle Reference Design
|
| App Notes |
AN
|
Protection Circuitry for Reversed Charger Connections to the DS2784 High-Side nFET Protector
|
| 2008-05-06 |
| App Notes |
AN
|
Using the DS2786 Battery Fuel Gauge in the Host Side of a 2-Cell Battery Application
|
| 2008-05-01 |
| App Notes |
AN
|
Understanding the Basics of the Wafer-Level Chip-Scale Package (WL-CSP)
|
| 2008-04-16 |
| App Notes |
AN
|
HFAN-02.7.0 Reducing Laser Driver Output Noise When No Input Signal Is Applied
|
| 2008-04-01 |
| App Notes |
AN
|
Extend Battery Life in Handheld Video Systems by Reducing Video Subsystem Operating and Standby Power
|
| 2008-03-31 |
| App Notes |
AN
|
Thermal Design Considerations for Video Filters
|
| App Notes |
AN
|
C-Code Software Routines for Using the SPI Interface on the MAX7456 On-Screen Display
|
| 2008-03-28 |
| App Notes |
AN
|
Estimating Switching Speed for the DS2712 NiMH Battery Charger
|
| App Notes |
AN
|
Porting Applications from the High-Speed Micro Family to Ultra-High-Speed Flash Microcontrollers
|
| 2008-03-27 |
| App Notes |
AN
|
Choosing the Right 1-Wire® Master for Embedded Applications
|
| App Notes |
AN
|
Reference Design for an 802.11b/g RF Front-End Module Using the MAX2830
|
| App Notes |
AN
|
New CCII Current Conveyor
|
| App Notes |
AN
|
Estimating Switching Speed for the DS2715 NiMH Battery Charger
|
| 2008-03-26 |
| App Notes |
AN
|
Making the MAX1452/MAX1455 Signal Conditioners Tolerant of Supply Limitations
|
| App Notes |
AN
|
Enhancing the Gate-Drive Capacity of the DS39xx CCFL Controllers
|
| App Notes |
AN
|
Adding Thermal Protection to the DS2784 Stand-Alone Fuel Gauge
|
| App Notes |
AN
|
Telecom Hot-Swap Reference Design Is Immune to Overvoltage and Brownout Input Transients
|
| 2008-03-25 |
| App Notes |
AN
|
Using the uIP Stack to Network a MAXQ Microcontroller
|
| App Notes |
AN
|
Selecting SPI Clock Modes for Interfacing the MAX1132 ADC with the MAXQ2000 Microcontroller
|
| App Notes |
AN
|
Getting Started with the DS8113 Smart-Card Analog Interface Evaluation Kit
|
| 2008-03-24 |
| App Notes |
AN
|
How to Use the MAXQ2000 as a Voltmeter
|
| 2008-03-20 |
| App Notes |
AN
|
Simplify the Design of 1-Cell Li+ Battery-Operated Devices
|
| App Notes |
AN
|
Using the DS4412 to Margin the Output Voltage of a DC-DC Converter
|
| 2008-03-17 |
| App Notes |
AN
|
MAX2160 ISDB-T Reference Design
|
| App Notes |
AN
|
How to Program the Bias DAC in Manual Mode for the DS1863/DS1865 PON Controllers
|
| 2008-03-14 |
| App Notes |
AN
|
Optimizing the Load-Switch Function of the DS2715 Battery-Charger IC
|
| 2008-03-13 |
| App Notes |
AN
|
Frequently Asked Questions (FAQs) for Technical Support
|
| 2008-03-10 |
| App Notes |
AN
|
Characterizing a Lithium-Ion (Li+) Cell for Use with an Open-Circuit-Voltage (OCV) Based Fuel Gauge
|
| App Notes |
AN
|
Calibrating the Current Offset Bias (COB) Register for the DS278x Family of Fuel Gauges
|
| 2008-03-07 |
| App Notes |
AN
|
Understanding Li+ Battery Operation Lessens Charging Safety Concerns
|
| 2008-03-04 |
| App Notes |
AN
|
Reference Design for a Powered-Device (PD) Module Based on the MAX5941B PWM Controller
|
| App Notes |
AN
|
Advantages of AC-Coupling in SerDes Applications
|
| 2008-02-29 |
| App Notes |
AN
|
Interfacing a DS3234 Extremely Accurate SPI-Bus Real-Time Clock (RTC) to a Motorola Digital Signal Processor (DSP)
|
| 2008-02-26 |
| App Notes |
AN
|
Cookbook for Analog Video Filtering in Camera Systems
|
| App Notes |
AN
|
Using the MAXQ3210 in a Light-Beam Alarm System
|
| 2008-02-21 |
| App Notes |
AN
|
Addressing the Physical Security of Encryption Keys
|
| 2008-02-19 |
| App Notes |
AN
|
Interfacing High-Speed Signals
|
