Application Notes

• App Note 5266: Quick Reference Guide for Programming the DS1877 SFP Controller
• App Note 4794: HFRD-49.1: Multirate, 1.0625Gbps to 10.3125Gbps, SFP+ LR Transceiver
• App Note 4735: Quick Reference Guide for Programming the DS1873 SFP+ Controller
• App Note 4557: Digital Resistor Sets Operating Power for Laser Driver
• App Note 4457: Assess Power-Supply Noise Rejection in Low-Jitter PLL Clock Generators
• App Note 4324: Variable Resistor and Temperature-Indexed Lookup Table (LUT) Compensate for Regulator Output
• App Note 4227: HFAN-02.7.0 Reducing Laser Driver Output Noise When No Input Signal Is Applied
• App Note 4222: DS1863; DS1865; DS1875: How to Interface to MAX3736 Compact Laser Driver
• App Note 4157: Enhanced RSSI Calibration for APDs Using the DS1864
• App Note 4122: Simple Regulator Provides Constant Voltage for High-Side Current Monitors
• App Note 4094: HFRD-30.1: SFP+ Host Board
• App Note 4057: How to Increase the Operating Speed on the MAX4007
• App Note 3993: HFRD-26.0: GEPON SFF Host Board
• App Note 3953: Side-by-Side Comparison of Fiber-Monitoring and Control ICs
• App Note 3933: HFRD-25.1: Ultra Low-Cost GEPON SFF ONT
• App Note 3926: HFRD-22.3: Modular GPON (MOGPON) ONT
• App Note 3923: Connecting Multiple DS1859 Devices on the Same I²C Bus
• App Note 3896: HFTA-14.0 Design Challenges of GPON FEC Receivers
• App Note 3812: HFRD-22.2: Modular GPON (MOGPON) ONT
• App Note 3766: HFTA-12.0: Measuring Crosstalk Penalty in High-Speed Bidirectional Serial Communication Modules
• App Note 3751: How to Program a Device Using the File Tab in the DS185XEVKIT
• App Note 3742: MAX3735A: Special Considerations When Interfacing the MAX3735A to the DS1859
• App Note 3725: HFAN-02.6.0: Reducing Noise and Wander in Low-Speed (<622Mbps) Optical Transmitters
• App Note 3669: Power-Sensing Circuit Breaker Breaks New Ground
• App Note 3647: HFRD-10.4: 1244Mbps/1244Mbps GPON ONT with Video Overlay
• App Note 3600: HFRD-21.0: 2.5Gbps Cooled TOSA Evaluation Board (Includes MAX3735A Laser Driver and MAX8521 TEC Controller)
• App Note 3596: MAX3740: The MAX3740/MAX3795 Laser Driver Average Power Monitors (PWRMON)
• App Note 3496: HFRD-10.2: 622Mbps/1244Mbps GPON ONT
• App Note 3481: Using the DS1859 with External EEPROM
• App Note 3454: HFRD-14.0: Multirate (1Gbps to 4.25Gbps) 850nm Small Form-Factor Pluggable (SFP) Transceiver
• App Note 3451: HFRD-16.0: 1Gbps to 4.25Gbps Active Copper SFP Cable Assembly
• App Note 3427: Interfacing the DS1859 Digitally Controlled Resistors to the MAX3735 Laser Driver
• App Note 3408: DS1856 Internal Calibration and Right Shifting (Scalable Dynamic Ranging)
• App Note 3391: How to Use the DS185xEVKIT to Evaluate the DS1856
• App Note 3381: HFAN-03.2.0: Improving Noise Rejection of a PIN-TIA ROSA
• App Note 3376: HFRD-15.3: High-Frequency SFP Host Board (Includes Integrated RS-232 to I²C Conversion)
• App Note 3317: Adding Windows NT/2000/XP Support to the AN3315 Parallel-Port 2-Wire Software
• App Note 3315: Writing Parallel-Port 2-Wire Software in C
• App Note 3258: HFTA-08.0: Receivers and Transmitters in DWDM Systems
• App Note 3257: Using DS3902 in Low Cost Optical Modules
• App Note 3252: How to Add an Offset to the DS1859 Temperature Reading
• App Note 3239: HFAN-02.5.0: Single-Ended vs Differential Methods of Driving a Laser Diode
• App Note 3230: How to Use a PC's Parallel Port to Communicate with 2-Wire Devices
• App Note 3080: Accurate Power Control of the MAX3740A Laser Driver
• App Note 3015: MAX3735A: MAX3735A Laser Driver Output Configurations, Part 4: Driving VCSELS
• App Note 2930: HFAN-02.4.0: Over-Voltage Protection for SFP Laser Drivers [Application Brief]
• App Note 2858: DS1859 Internal Calibration and Right Shifting (Scalable Dynamic Ranging)
• App Note 2703: MAX3735A: Laser Driver Output Configurations, Part 3: Differential Drive
• App Note 2360: HFRD-05.0: Multi-Rate (1Gbps - 3.2Gbps) 850nm Small Form Factor Pluggable (SFP) Transceiver
• App Note 2135: HFRD-04.0: 2.7Gbps, 1310nm Small Form Factor Pluggable (SFP) Transceiver
• App Note 2111: MAX3735A: Laser Driver Output Configurations, Part 1: DC-Coupled Optimization Techniques
• App Note 1938: HFAN-03.0.2: Optical Receiver Performance Evaluation
• App Note 1937: HFAN-02.3.3: Optimizing the Resolution of Laser Driver Current Settings Using a Linear Digital Potentiometer
• App Note 1922: Calculator Converts Analog Signals to Digital Format for Optical SFF-8472 Standard
• App Note 1908: MAX3735: Using the MAX3735 in a Small Form Factor (SFF) Transceiver Module
• App Note 228: How to Interpret DS1854, DS1857, and DS1858 Temperature and Voltage Readings
• App Note 1766: HFRD-03.0: Multi-Rate (1Gbps - 2.7Gbps) Small Form Factor Pluggable (SFP) Transmitter
• App Note 1747: MAX3735: Choosing the APC Loop Capacitors Used with MAX3735/MAX3735A SFP Module Designs
• App Note 210: Meet SFF-8472 Resolution and Accuracy Goals with Internal Calibration
• App Note 174: Monitor Calibration in Fiber Optic Applications
• App Note 1065: MAX3274: MAX3274 Optimizes Dual-Rate, Fibre Channel Receivers
• App Note 985: HFAN-09.0.2: Optical Signal-to-Noise Ratio and the Q-Factor in Fiber-Optic Communications Systems
• App Note 607: HFAN-03.0.0: Accurately Estimating Optical Receiver Sensitivity
• App Note 630: HFAN-08.0.1: Understanding Bonding Coordinates and Physical Die Size
• App Note 596: HFAN-02.2.0: Extinction Ratio and Power Penalty