Optical Fiber Access - Application Notes



		Overview
		Suggested Components
		Application Notes
		New Product Announcements

Maxim > Solutions > Optical Fiber Access

Application Notes

App Note 4233: Carrier Ethernet Service Demarcation in Optical Networks
App Note 4227: HFAN-02.7.0 Reducing Laser Driver Output Noise When No Input Signal Is Applied
App Note 4222: DS1863; DS1865; DS1875: How to Interface to MAX3735 or MAX3741 Compact Laser Driver
App Note 4196: How to Program the Bias DAC in Manual Mode for the DS1863/DS1865 PON Controllers
App Note 4157: Enhanced RSSI Calibration for APDs Using the DS1864
App Note 4124: DS33X162 Product Family FAQ
App Note 4122: Simple Regulator Provides Constant Voltage for High-Side Current Monitors
App Note 4110: DS1865 Quick Reference Guide
App Note 4102: Using Ethernet over PDH in SONET/SDH Networks
App Note 4101: Differentiating Digital Potentiometer Features
App Note 4077: How to Interface the DS1862 to a Laser Driver with an Integrated APC Loop
App Note 4057: How to Increase the Operating Speed on the MAX4007
App Note 4052: Quick Reference Guide to the DS1863 Memory Map
App Note 4051: Using an Analog Voltage to Control a Digital Potentiometer
App Note 3996: Logging the Linear Digital Potentiometer
App Note 3993: HFRD-26.0: GEPON SFF Host Board
App Note 3985: HFRD-25.2: Low-Cost GEPON SFF ONT with µC
App Note 3971: Using a Digital Potentiometer for Push-and-Hold Control-Setting Adjustments
App Note 3970: Using a Digital Potentiometer to Implement an Automotive Lighting Dimmer Conserves Power and Increases Efficiency
App Note 3953: Side-by-Side Comparison of Fiber-Monitoring and Control ICs
App Note 3933: HFRD-25.1: Ultra Low-Cost GEPON SFF ONT
App Note 3927: MAX3643: Generating a TX Power Monitor in Burst Mode Applications (Using MAX3643 and the DS1863 or DS1865)
App Note 3926: HFRD-22.3: Modular GPON (MOGPON) ONT
App Note 3923: Connecting Multiple DS1859 Devices on the Same I²C Bus
App Note 3903: Using Internal Calibration and Right Shifting (Scalable Dynamic Ranging) on the DS1863/DS1865 to Enhance ADC Performance
App Note 3896: HFTA-14.0 Design Challenges of GPON FEC Receivers
App Note 3890: Using the DS28CZ04 in an Active Copper SFP Cable Assembly
App Note 3887: MAX3643: Using the MAX3643 Laser Driver with a Low-Cost Microcontroller
App Note 3849: Ethernet-over-PDH Technology Overview
App Note 3833: MAX3654: Obtaining Larger Output Signals in GPON ONT Video Applications Using the MAX3654
App Note 3812: HFRD-22.2: Modular GPON (MOGPON) ONT
App Note 3766: HFTA-12.0: Measuring Crosstalk Penalty in High-Speed Bidirectional Serial Communication Modules
App Note 3751: How to Program a Device Using the File Tab in the DS185XEVKIT
App Note 3742: MAX3735A: Special Considerations When Interfacing the MAX3735A to the DS1859
App Note 3647: HFRD-10.4: 1244Mbps/1244Mbps GPON ONT with Video Overlay
App Note 3516: MAX3656: Optimizing the MAX3656 Output Network for Long Laser Leads in GPON/GEPON Application
App Note 3496: HFRD-10.2: 622Mbps/1244Mbps GPON ONT
App Note 3488: EEPROM Programming Instructions for DS33Z11/DS33Z44
App Note 3481: Using the DS1859 with External EEPROM
App Note 3454: HFRD-14.0: Multirate (1Gbps to 4.25Gbps) 850nm Small Form-Factor Pluggable (SFP) Transceiver
App Note 3451: HFRD-16.0: 1Gbps to 4.25Gbps Active Copper SFP Cable Assembly
App Note 3427: Interfacing the DS1859 Digitally Controlled Resistors to the MAX3735 Laser Driver
App Note 3411: DS33Z11 - Ethernet LAN To Unframed T1/E1 WAN Bridge
App Note 3408: DS1856 Internal Calibration and Right Shifting (Scalable Dynamic Ranging)
App Note 3391: How to Use the DS185xEVKIT to Evaluate the DS1856
App Note 3381: HFAN-03.2.0: Improving Noise Rejection of a PIN-TIA ROSA
App Note 3376: HFRD-15.0: High-Frequency SFP Host Board (Includes Integrated RS-232 to I²C Conversion)
App Note 3363: New Ethernet Systems Distribute DC Power with Data
App Note 3342: MAX3656: Using the MAX3656 Laser Driver to Transmit Serial Digital Video with Pathological Patterns
App Note 3317: Adding Windows NT/2000/XP Support to the AN3315 Parallel-Port 2-Wire Software
App Note 3315: Writing Parallel-Port 2-Wire Software in C
App Note 3290: HFAN-04.5.3: A Stressed Source for Testing 4Gbps 850nm FC Receivers
App Note 3258: HFTA-08.0: Receivers and Transmitters in DWDM Systems
App Note 3257: Using DS3902 in Low Cost Optical Modules
App Note 3252: How to Add an Offset to the DS1859 Temperature Reading
App Note 3239: HFAN-02.5.0: Single-Ended vs Differential Methods of Driving a Laser Diode
App Note 3230: How to Use a PC's Parallel Port to Communicate with 2-Wire Devices
App Note 3200: Buck Regulator Generates Ultra-Low Output Voltage
App Note 3175: Base-Station RF Power-Amplifier Biasing
App Note 3080: Accurate Power Control of the MAX3740 Laser Driver
App Note 3077: A Digitally Controllable Lowpass Filter Using a Digital Potentiometer
App Note 3015: MAX3735A: MAX3735A Laser Driver Output Configurations, Part 4: Driving VCSELS
App Note 2931: HFTA-09.0: T3/E3/STS-1 Fiber Optic Extension
App Note 2858: DS1859 Internal Calibration and Right Shifting (Scalable Dynamic Ranging)
App Note 2767: DAC Makes Controller Programmable
App Note 2360: HFRD-05.0: Multi-Rate (1Gbps - 3.2Gbps) 850nm Small Form Factor Pluggable (SFP) Transceiver
App Note 2135: HFRD-04.0: 2.7Gbps, 1310nm Small Form Factor Pluggable (SFP) Transceiver
App Note 2111: MAX3735A: MAX3735A Laser Driver Output Configurations, Part 1: DC-Coupled Optimization Techniques
App Note 2099: DS1847/DS1848 Online Interactive Temperature Calculator
App Note 1993: MAX3872: Choosing an Optimal Filter Capacitor for the MAX3872 Multi-Rate CDR
App Note 1938: HFAN-03.0.2: Optical Receiver Performance Evaluation
App Note 233: Regenerating the DS1847/DS1848 Resistor Calibration Constants
App Note 238: 2-Wire Controlled Digital DIP Switch Using the DS3904
App Note 237: Introduction of the DS1847 for Industrial Controls
App Note 235: Using Spare NV Digital Pots as NV Digital Configuration Bits
App Note 1831: Low-Noise APD Bias Circuit
App Note 228: How to Interpret DS1854, DS1857, and DS1858 Temperature and Voltage Readings
App Note 225: Using Digital Potentiometers in Adjustable Step-Down DC-DC Converter Designs
App Note 1794: Interfacing Digitally Controlled Pots and Resistors to Laser Drivers
App Note 1769: Behind the Light Show in Optical Transceivers
App Note 216: How to Interpret DS1847/DS1848 Temperature Readings
App Note 215: 2-Wire Communication Using LabVIEW
App Note 174: Monitor Calibration in Fiber Optic Applications
App Note 1151: HFRD-02.0: 2.5Gbps Small Form Factor (SFF) Transmitter
App Note 1119: HFAN-02.2.1: Maintaining the Extinction Ratio of Optical Transmitters Using K-Factor Control
App Note 207: DS1845/DS1855 Temperature Coefficient Analysis
App Note 206: Using a PC's RS-232 Serial Port To Communicate with 2-Wire Devices
App Note 1093: HFAN-02.3.2: Maintaining Average Power and Extinction Ratio, Part 2, MAX3863 Laser Driver and DS1847 Digital Resistor
App Note 166: Interfacing Digitally Controlled Potentiometers and Resistors to Laser Drivers
App Note 994: Reference Voltage for Multiple ADCs
App Note 181: DS1847/DS1848 Temperature Coefficient Supplement
App Note 895: HFAN-03.1.1: Digitally Programmable Low-Noise Avalanche Photo Detector (APD) Bias Circuit
App Note 167: Considerations for the DS1847/DS1848 Look-Up Tables
App Note 607: HFAN-03.0.0: Accurately Estimating Optical Receiver Sensitivity
App Note 593: Dallas Semiconductor Digital Potentiometers: Frequently Asked Questions
App Note 630: HFAN-08.0.1: Understanding Bonding Coordinates and Physical Die Size
App Note 596: HFAN-02.2.0: Extinction Ratio and Power Penalty
App Note 754: Selecting the Right Series Voltage Reference for Absolute-Accuracy Voltage-Output DAC Designs