Product Line Filter: All Product Lines ------------------ Digital-to-Analog Converters Optoelectronics

Application Notes

App Note 4227: HFAN-02.7.0 Reducing Laser Driver Output Noise When No Input Signal Is Applied App Note 4222: How to Interface the DS1863/DS1865/DS1875 to a Compact Laser Driver App Note 4094: HFRD-30.1: SFP+ Host Board App Note 4025: DACs vs. Digital Potentiometers: Which Is Right for My Application? App Note 3990: Current-Source DAC with PIN Diode Provides RF Attenuation and Thermal Compensation App Note 3934: HFRD-20.2: 1310nm XFP Uncooled EML Transceiver App Note 3896: HFTA-14.0 Design Challenges of GPON FEC Receivers App Note 3812: HFRD-22.2: Modular GPON (MOGPON) ONT App Note 3766: HFTA-12.0: Measuring Crosstalk Penalty in High-Speed Bidirectional Serial Communication Modules App Note 3742: MAX3735A: Special Considerations When Interfacing the MAX3735A to the DS1859 App Note 3725: HFAN-02.6.0: Reducing Noise and Wander in Low-Speed (<622Mbps) Optical Transmitters App Note 3647: HFRD-10.4: 1244Mbps/1244Mbps GPON ONT with Video Overlay App Note 3600: HFRD-21.0: 2.5Gbps Cooled TOSA Evaluation Board (Includes MAX3735A Laser Driver and MAX8521 TEC Controller) App Note 3596: MAX3740: The MAX3740/MAX3795 Laser Driver Average Power Monitors (PWRMON) App Note 3516: MAX3656: Optimizing the MAX3656 Output Network for Long Laser Leads in GPON/GEPON Application App Note 3496: HFRD-10.2: 622Mbps/1244Mbps GPON ONT App Note 3454: HFRD-14.0: Multirate (1Gbps to 4.25Gbps) 850nm Small Form-Factor Pluggable (SFP) Transceiver App Note 3427: Interfacing the DS1859 Digitally Controlled Resistors to the MAX3735 Laser Driver App Note 3376: HFRD-15.0: High-Frequency SFP Host Board (Includes Integrated RS-232 to I²C Conversion) App Note 3342: MAX3656: Using the MAX3656 Laser Driver to Transmit Serial Digital Video with Pathological Patterns App Note 3258: HFTA-08.0: Receivers and Transmitters in DWDM Systems App Note 3257: Using DS3902 in Low Cost Optical Modules App Note 3239: HFAN-02.5.0: Single-Ended vs Differential Methods of Driving a Laser Diode App Note 3015: MAX3735A: MAX3735A Laser Driver Output Configurations, Part 4: Driving VCSELS App Note 2934: MAX3701: Interfacing the MAX3701 to a Blue/Violet Laser Diode [Application Brief] App Note 2931: HFTA-09.0: T3/E3/STS-1 Fiber Optic Extension App Note 2930: HFAN-02.4.0: Over-Voltage Protection for SFP Laser Drivers [Application Brief] App Note 2703: MAX3735A: MAX3735A Laser Driver Output Configurations, Part 3: Differential Drive App Note 2135: HFRD-04.0: 2.7Gbps, 1310nm Small Form Factor Pluggable (SFP) Transceiver App Note 2111: MAX3735A: MAX3735A Laser Driver Output Configurations, Part 1: DC-Coupled Optimization Techniques App Note 1937: HFAN-02.3.3: Optimizing the Resolution of Laser Driver Current Settings Using a Linear Digital Potentiometer App Note 1908: MAX3735: Using the MAX3735 in a Small Form Factor (SFF) Transceiver Module App Note 1816: HFAN-02.0.2: Laser Diode to Single-Mode Fiber Coupling Efficiency: Part 1 - Butt Coupling App Note 1794: Interfacing Digitally Controlled Pots and Resistors to Laser Drivers App Note 1788: HFAN-06.2: IBIS Data for CML, PECL, and LVDS Interface Circuits App Note 1766: HFRD-03.0: Multi-Rate (1Gbps - 2.7Gbps) Small Form Factor Pluggable (SFP) Transmitter App Note 1747: MAX3735: Choosing the APC Loop Capacitors Used with MAX3735/MAX3735A SFP Module Designs App Note 1738: HFAN-09.0.4: NRZ Bandwidth - LF Cutoff and Baseline Wander App Note 210: Implementing Internal Calibration Using the DS1858 App Note 1151: HFRD-02.0: 2.5Gbps Small Form Factor (SFF) Transmitter App Note 1119: HFAN-02.2.1: Maintaining the Extinction Ratio of Optical Transmitters Using K-Factor Control App Note 1102: HFAN-09.0.3: APON Class A, B, & C Physical Layer Requirements App Note 1093: HFAN-02.3.2: Maintaining Average Power and Extinction Ratio, Part 2, MAX3863 Laser Driver and DS1847 Digital Resistor App Note 1092: HFAN-02.3.1: Maintaining Average Power and Extinction Ratio, Part 1, Slope Efficiency and Threshold Current App Note 995: MAX3892: 2.7Gbps Transponder Applications Using the MAX3892, MAX3882, and MAX3670 Chipset App Note 985: HFAN-09.0.2: Optical Signal-to-Noise Ratio and the Q-Factor in Fiber-Optic Communications Systems App Note 984: HFAN-02.0.1: Parasitic Inductance Effects in 10Gbps Fiber Optic Design App Note 878: MAX3865: The MAX3865 Laser Driver with Automatic Modulation Control App Note 274: HFAN-02.0: Interfacing Maxim Laser Drivers With Laser Diodes App Note 596: HFAN-02.2.0: Extinction Ratio and Power Penalty App Note 1089: HFAN-05.1.0: Single-Ended and Differential S-Parameters App Note 472: MAX3930: Simulating Direct Laser Modulation with the MAX3930 App Note 697: Silicon Germanium (SiGe) Technology Enhances Radio Front-End Performance App Note 242: MAX3667: Driving A Laser Diode With the MAX3667 From A Single +3.3V Power Supply