|
Maxim > Solutions > Automotive
Power Systems
|
|
| Display |
Title/Parts |
Key Advantages |
| QV PDF |
4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers
MAX15004, MAX15005
| Automotive VFD Power Supply Operates Down to 2.5V Input Voltage After Startup and Includes Output Overvoltage Protection for VFDs |
| QV PDF |
4V to 72V Input LDOs with Boost Preregulator
MAX5092, MAX5093
| Automotive LDOs with Boost Preregulators Operate Seamlessly from 4V Cold Crank to 72V Load Dump |
| QV PDF |
28V, 100mA, Low-Quiescent-Current LDO with Reset and Power-Fail Input/Output
MAX5091
| 100mA, 45µA IQ, LDO Regulator in High-Power Thermally Enhanced 8-Pin SO or TDFN Package |
| QV PDF |
40V, 600mA Buck Converters with Low-Quiescent-Current Linear Regulator Mode
MAX5096, MAX5097
| Industry's First Automotive Buck Converter with Low IQ LDO Mode Operates Seamlessly from 4V Cold Crank to 40V Input |
| QV PDF |
2A, 76V, High-Efficiency MAXPower Step-Down DC-DC Converters
MAX5090, MAX5090A, MAX5090B, MAX5090C
| Designed to Withstand Harsh Automotive Environments |
| QV PDF |
High-Performance, Single-Ended, Current-Mode PWM Controllers
MAX5070, MAX5071
| 1MHz, Single-Ended, Current-Mode PWM Controllers Pin Compatible with UC2842/UC2844 Series |
| QV PDF |
High-Frequency, Current-Mode PWM Controller with Accurate Oscillator and Dual FET Drivers
MAX5069
| 2.5MHz, Universal-Input, Dual-Output PWM Controller with Precision-Programmable Switching Frequency and Start/Stop Voltage |
| QV PDF |
High-Frequency, Current-Mode PWM Controller with Accurate Programmable Oscillator
MAX5068
| 1.25MHz, Universal-Input, Current-Mode PWM Controller with Precision-Programmable Switching Frequency and Start/Stop Voltage |
| QV PDF |
Parallelable, Secondary-Side Synchronous Rectifier Driver and Feedback-Generator Controller ICs
MAX5058, MAX5059
| Secondary-Side, Synchronous-Rectifier Drivers Integrate Shunt Reference, Current Sharing, and Voltage Margining |
| QV PDF |
Low-Power, Single/Dual-Voltage Window Detectors
MAX6754, MAX6755, MAX6756, MAX6757, MAX6758, MAX6759, MAX6760, MAX6761, MAX6762, MAX6763, MAX6764
| Single-/Dual-Voltage Window Detectors Monitor Under-/Overvoltage Down to 0.4V |
| QV PDF |
65V, 200mA, Low-Quiescent-Current Linear Regulators in TDFN
MAX5084, MAX5085
| 200mA, 65V Input, Low-Quiescent-Current Linear Regulators in High-Power TDFN Packages |
| QV PDF |
Parallelable, Clamped Two-Switch Power-Supply Controller IC
MAX5051
| Parallelable, Clamped, Two-Switch Power-Supply Controller IC for High-Efficiency Power Supplies |
| QV PDF |
Two-Switch Power ICs with Integrated Power MOSFETs and Hot-Swap Controller
MAX5042, MAX5043
| Two-Switch, Clamped, PWM Power IC Integrates Power MOSFETs and a Hot-Swap Controller |
| QV PDF |
1A, 76V, High-Efficiency MAXPower Step-Down DC-DC Converter
MAX5035
| |
| QV PDF |
500mA, 76V, High-Efficiency, MAXPower Step-Down DC-DC Converter
MAX5033
| 500mA, 76V, High-Efficiency, MAXPower™ Step-Down DC-DC Converter Consumes Only 350µA Quiescent Current at No Load |
| QV PDF |
±80V Fault-Protected/Tolerant CAN Transceivers for In-Car Applications
MAX3054, MAX3055, MAX3056
| Industry's First ±80V Fault Protected and Fault Tolerant CAN Transceiver Is ideal for 42V Battery Systems |
| QV PDF |
65V, Low-Quiescent-Current, High-Voltage Linear Regulators with µP Reset and Watchdog Timer
MAX5023, MAX5024
| High-Voltage, Low-Quiescent-Current Linear Regulators Ideal for Automotive and Industrial Applications |
| QV PDF |
±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceivers
MAX3050, MAX3057
| |
| QV PDF |
µP Reset Circuits with Capacitor-Adjustable Reset/Watchdog Timeout Delay
MAX6746, MAX6747, MAX6748, MAX6749, MAX6750, MAX6751, MAX6752, MAX6753
| |
| QV PDF |
7.6A, 12ns, SOT23/TDFN MOSFET Driver
MAX5048
| |
| QV PDF |
Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps
MAX4091, MAX4092, MAX4094
| Low Power RRI/O Op Amp Family Drives 2000pF Capacitive Loads |
| QV PDF |
4-Pin, Low-Power µP Reset Circuits with Manual Reset
MAX6803, MAX6804, MAX6805
| 4-Pin, Low-Power uP Reset Circuits with Manual Reset |
| QV PDF |
3-Pin, Low-Power µP Reset Circuits
MAX6800, MAX6801, MAX6802
| 3-Pin/4-Pin, Low-Power uP Reset Circuits with Manual Reset |
| QV PDF |
Low-Voltage, SOT23, µP Supervisors with Power-Fail In/Out, Manual Reset, and Watchdog Timer
MAX6701, MAX6701A, MAX6702, MAX6702A, MAX6703, MAX6703A, MAX6704, MAX6705, MAX6705A, MAX6706, MAX6706A, MAX6707, MAX6707A, MAX6708
| |
| QV PDF |
Low-Voltage SOT23 µP Supervisors with Manual Reset and Watchdog Timer
MAX6821, MAX6822, MAX6823, MAX6824, MAX6825
| |
| QV PDF |
Dual, Ultra-Low-Voltage SOT23 µP Supervisors with Manual Reset and Watchdog Timer
MAX6826, MAX6827, MAX6828, MAX6829, MAX6830, MAX6831
| |
| QV PDF |
Micropower, Ultra-Small, Single/Dual/Quad Single-Supply Comparators
MAX9021, MAX9022, MAX9024
| |
| QV PDF |
Low-Cost, Ultra-Small, Single/Dual/Quad Single-Supply Comparators
MAX9030, MAX9031, MAX9032, MAX9034
| 188ns, Micropower Comparator Family Features Single Supply With Shutdown Mode In SC70-6 Package |
| QV PDF |
Low-Voltage, Quad, SPST CMOS Analog Switches
MAX4610, MAX4611, MAX4612
| |
| QV PDF |
1.8V to 28V Input, PWM Step-Up Controllers in µMAX
MAX668, MAX669
| Flexible Converters Offer Step-Up, SEPIC, Flyback and Isolated Topologies. MAX668 Output Voltages Limited Only by External Component Ratings. |
| QV PDF |
Low-Voltage, CMOS Analog Multiplexers/Switches
MAX4581, MAX4582, MAX4583
| |
| QV PDF |
5-Pin Microprocessor Supervisory Circuits with Watchdog Timer and Manual Reset
MAX823, MAX823L, MAX823M, MAX823R, MAX823S, MAX823T, MAX823Y, MAX823Z, MAX824, MAX824L, MAX824M, MAX824R, MAX824S, MAX824T, MAX824Y, MAX824Z, MAX825, MAX825L, MAX825M, MAX825R, MAX825S, MAX825T, MAX825Y, MAX825Z
| Industry's-First SOT Reset ICs with Watchdog and Manual Reset |
| QV PDF |
3-Pin Microprocessor Reset Circuits
MAX803L, MAX803M, MAX803R, MAX803S, MAX803T, MAX803Z, MAX809J, MAX809L, MAX809M, MAX809R, MAX809S, MAX809T, MAX809Z, MAX810L, MAX810M, MAX810R, MAX810S, MAX810T, MAX810Z
| Industry's-First 3-Pin SC70 Reset ICs |
| Key Specifications: Controller Area Network (CAN) Transceivers |
| Part Number |
ICC (Dominant Mode)
(mA) |
Fault Protect.
(±V) |
Fault Tolerant |
ICC (Recessive Mode)
(mA) |
ICC (Shutdn.)
(µA) |
ESD Protect.
(±kV) |
Slew Rate Limiting |
VSUPPLY
(V) |
Features |
Package/Pins |
| max |
typ |
typ |
| MAX3054 |
16 |
80 |
Yes |
4 |
3 |
3 |
No |
5 |
- |
|
| MAX3055 |
16 |
Yes |
4 |
3 |
Yes |
- |
|
| MAX3056 |
16 |
Yes |
4 |
3 |
Yes |
- |
|
| MAX3050 |
6 |
- |
5.5 |
15 |
Yes |
Auto-Shutdown |
|
| MAX3057 |
6 |
- |
5.5 |
15 |
Yes |
- |
|
|
See All Controller Area Network (CAN) Transceivers (15)
|
| Key Specifications: Comparators |
| Part Number |
Comp-
arators |
tPD
(ns) |
VCMVR |
VSUPPLY (Total)
(V) |
VSUPPLY (Total)
(V) |
ICC per Comp.
(µA) |
Shutdn |
VOS
(mV) |
VOS
(mV) |
Logic Out |
Oper. Temp.
(°C) |
Package/Pins |
Smallest Available Pckg.
(mm2) |
| typ |
to Neg. Rail |
min |
max |
max |
typ |
max |
max w/pins |
| MAX9021 |
1 |
3000 |
Yes |
2.5 |
5.5 |
5 |
- |
1 |
8 |
|
-40 to +125 |
|
5.3 |
| MAX9022 |
2 |
3000 |
5 |
- |
8 |
|
|
9 |
| MAX9024 |
4 |
3000 |
5 |
- |
8 |
|
|
33.4 |
| MAX9030 |
1 |
188 |
55 |
Yes |
5 |
|
|
9 |
| MAX9031 |
1 |
188 |
55 |
- |
5 |
|
|
5.3 |
| MAX9032 |
2 |
188 |
55 |
- |
5 |
|
|
9 |
| MAX9034 |
4 |
188 |
55 |
- |
5 |
|
|
33.4 |
|
See All Comparators (83)
|
| Key Specifications: Isolated Power Supplies |
| Part Number |
VIN
(V) |
VIN
(V) |
Topology |
Features |
Cntrl. Loop |
Feedback |
Freq.
(kHz) |
Duty Cycle
(%) |
ISTARTUP
(mA) |
ICC
(mA) |
Gate Drive Current
(A) |
Oper. Temp.
(°C) |
| min |
max |
min |
max |
max |
max |
max |
| MAX5042 |
20 |
76 |
| Flyback | | Two-Switch Forward |
|
| Adjustable Frequency | | High Voltage Start-Up Circuit | | Internal Error Amplifier | | Internal Power MOSFET(s) | | Synchronizable Freqeuncy | | Synchronous Rectifier Driver | | Thermal Shutdown | | UVLO |
|
Voltage Mode |
|
600 |
47 |
2 |
6 |
- |
-40 to +125 |
| MAX5043 |
20 |
| Flyback | | Two-Switch Forward |
|
| Adjustable Frequency | | High Voltage Start-Up Circuit | | Internal Error Amplifier | | Internal Power MOSFET(s) | | Synchronizable Freqeuncy | | Synchronous Rectifier Driver | | Thermal Shutdown | | UVLO |
|
600 |
47 |
2 |
6 |
- |
| MAX5051 |
11 |
| Flyback | | Single-Ended Forward | | Two-Switch Forward |
|
| Adjustable Frequency | | High Voltage Start-Up Circuit | | Internal Error Amplifier | | Synchronizable Freqeuncy | | Synchronous Rectifier Driver | | Thermal Shutdown | | UVLO |
|
500 |
48 |
- |
8 |
5 |
|
See All Isolated Power Supplies (31)
|
| Key Specifications: Linear Regulators |
| Part Number |
Regulators |
VIN
(V) |
VIN
(V) |
Preset VOUT
(V) |
Adj. VOUT
(V) |
Adj. VOUT
(V) |
VDROPOUT @Rated ILOAD
(V) |
Rated ILOAD
(mA) |
ICC
(µA) |
Low Batt./ Pwr. Fail Out |
POK/Reset Thresh.
(V) |
Watchdog |
Reverse Batt. Protect. |
Oper. Temp.
(°C) |
Package/Pins |
Smallest Available Pckg.
(mm2) |
| min |
max |
min |
max |
typ |
max |
nom |
max w/pins |
| MAX5084 |
1 |
6.5 |
65 |
5 |
2.54 |
11 |
0.9 |
200 |
140 |
No |
- |
No |
No |
-40 to +125 |
|
9.6 |
| MAX5085 |
3.3 |
2.54 |
11 |
200 |
- |
No |
|
9.6 |
| MAX5023 |
|
- |
- |
150 |
|
Yes |
|
30.9 |
| MAX5024 |
|
2.5 |
11 |
150 |
|
No |
|
30.9 |
|
See All Linear Regulators (152)
|
| Key Specifications: Low-Side MOSFET Drivers |
| Part Number |
Description |
IOUT
(A) |
RON
(Ω) |
RON
(Ω) |
Rise/ Fall Time @+25°C
(ns) |
VSUPPLY
(V) |
VSUPPLY
(V) |
Oper. Temp.
(°C) |
Package/Pins |
Smallest Available Pckg.
(mm2) |
| peak |
typ |
max |
max |
min |
max |
max w/pins |
| MAX5048 |
Single Inverting |
7.6 |
0.23 |
0.3 |
8/3.2 (CL=1000pF) |
4 |
12.6 |
-40 to +125 |
|
9 |
|
See All Low-Side MOSFET Drivers (26)
|
| Key Specifications: Operational Amplifiers |
| Part Number |
Amps. |
Rail to Rail |
AVCL |
VSUPPLY (Total)
(V) |
VSUPPLY (Total)
(V) |
ICC per Amp.
(µA) |
ICC per Amp.
(µA) |
VOS
(µV) |
CMRR @DC
(dB) |
PSRR @DC
(dB) |
Input IBIAS
(nA) |
Unity Gain BW
(MHz) |
Slew Rate
(V/µs) |
en
(nV/√Hz) |
in
(pA/√Hz) |
Low Pwr. Shutdn |
Package/Pins |
| min |
min |
max |
typ |
max |
max |
typ |
typ |
max |
typ |
typ |
| MAX4091 |
1 |
Input/Output |
1 |
2.7 |
6 |
115 |
165 |
1400 |
90 |
100 |
180 |
0.5 |
0.2 |
12 |
1.5 |
No |
|
| MAX4092 |
2 |
|
| MAX4094 |
4 |
|
|
See All Operational Amplifiers (145)
|
| Key Specifications: Step-Down Switching Regulators |
| Part Number |
VIN
(V) |
VIN
(V) |
VOUT
(V) |
VOUT
(V) |
Preset VOUT
(V) |
Max. IOUT
(A) |
Max. IOUT
(A) |
Output Adjust. Method |
DC-DC Outputs |
Oper. Freq.
(kHz) |
Design Tools |
Package/Pins |
Smallest Available Pckg.
(mm2) |
| min |
max |
min |
max |
≥ |
≤ |
max w/pins |
| MAX5033 |
7.5 |
76 |
1.25 |
13.2 |
|
0.5 |
0.5 |
|
1 |
125 |
EE-Sim |
|
81.9 |
| MAX5035 |
1 |
1 |
|
30.9 |
|
See All Step-Down Switching Regulators (264)
|
| Key Specifications: Step-Up Switching Regulators |
| Part Number |
VIN
(V) |
VIN
(V) |
VOUT
(V) |
VOUT
(V) |
Max. IOUT
(A) |
Max. IOUT
(A) |
Output Adjust. Method |
DC-DC Outputs |
Oper. Freq.
(kHz) |
Design Tools |
Package/Pins |
Smallest Available Pckg.
(mm2) |
| min |
max |
min |
max |
≥ |
≤ |
max w/pins |
| MAX668 |
3 |
28 |
3 |
100 |
6 |
6 |
Resistor |
1 |
500 |
EE-Sim |
|
15.4 |
| MAX669 |
1.8 |
28 |
|
|
See All Step-Up Switching Regulators (90)
|
| Key Specifications: Supervisors (1 Monitored Voltage) |
| Part Number |
Reset Thresh.
(V) |
Reset Out |
Reset Out |
tRESET |
Watchdog Feature |
Watchdog Timeout |
Supervisor Features |
Reset Thresh. Accur.
(%) |
ICC
(µA) |
| Active Low |
Active High |
min |
@ +25°C |
max |
| MAX6754 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
|
No Watchdog |
- |
| Manual Reset | | Overvoltage/Window Monitor |
|
1.5 |
23 |
| MAX6755 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
- |
Push-Pull |
|
No Watchdog |
- |
| Manual Reset | | Overvoltage/Window Monitor |
|
1.5 |
23 |
| MAX6756 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
|
No Watchdog |
- |
| Manual Reset | | Overvoltage/Window Monitor |
|
1.5 |
23 |
| MAX6757 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
|
No Watchdog |
- |
| Manual Reset | | Overvoltage/Window Monitor |
|
1.5 |
23 |
| MAX6758 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
- |
Push-Pull |
|
No Watchdog |
- |
| Manual Reset | | Overvoltage/Window Monitor |
|
1.5 |
23 |
| MAX6759 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
|
No Watchdog |
- |
| Manual Reset | | Overvoltage/Window Monitor |
|
1.5 |
23 |
| MAX6763 |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
|
No Watchdog |
- |
Overvoltage/Window Monitor |
1.5 |
23 |
| MAX6746 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms | | 300ms to 1s | | <1ms | | >1s | | Adjustable |
|
| Cap Adjustable | | Input (WDI) |
|
|
Manual Reset |
2 |
10 |
| MAX6747 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms | | 300ms to 1s | | <1ms | | >1s | | Adjustable |
|
| Cap Adjustable | | Input (WDI) |
|
|
Manual Reset |
2 |
10 |
| MAX6748 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms | | 300ms to 1s | | <1ms | | >1s | | Adjustable |
|
| Cap Adjustable | | Input (WDI) |
|
|
Adjustable Reset Input |
2 |
10 |
| MAX6749 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms | | 300ms to 1s | | <1ms | | >1s | | Adjustable |
|
| Cap Adjustable | | Input (WDI) |
|
|
Adjustable Reset Input |
2 |
10 |
| MAX6752 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms | | 300ms to 1s | | <1ms | | >1s | | Adjustable |
|
| Cap Adjustable | | Input (WDI) | | Windowed |
|
|
- |
2 |
10 |
| MAX6753 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms | | 300ms to 1s | | <1ms | | >1s | | Adjustable |
|
| Cap Adjustable | | Input (WDI) | | Windowed |
|
|
- |
2 |
10 |
| MAX803 |
| 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
85ms to 300ms |
No Watchdog |
- |
- |
1.5 |
60 |
| MAX809 |
| 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
85ms to 300ms |
No Watchdog |
- |
- |
1.5 |
60 |
| MAX810 |
| 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
- |
Push-Pull |
85ms to 300ms |
No Watchdog |
- |
- |
1.5 |
60 |
| MAX6800 |
|
- |
Push-Pull |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms |
|
No Watchdog |
- |
- |
- |
12 |
| MAX6801 |
|
Push-Pull |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms |
|
No Watchdog |
- |
- |
- |
12 |
| MAX6802 |
|
Open Drain |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms |
|
No Watchdog |
- |
- |
- |
12 |
| MAX6704 |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
Push-Pull |
85ms to 300ms |
Input (WDI) |
1s to 2s |
| Adjustable Reset Input | | Manual Reset | | Power Fail Comparator/Low Battery Detect |
|
- |
25 |
| MAX6705 |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
85ms to 300ms |
| Input (WDI) | | Input/Output (WDI/WDO) |
|
1s to 2s |
| Adjustable Reset Input | | Manual Reset | | Power Fail Comparator/Low Battery Detect |
|
- |
25 |
| MAX6706 |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
- |
Push-Pull |
85ms to 300ms |
| Input (WDI) | | Input/Output (WDI/WDO) |
|
1s to 2s |
| Adjustable Reset Input | | Manual Reset | | Power Fail Comparator/Low Battery Detect |
|
- |
25 |
| MAX6707 |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
85ms to 300ms |
| Input (WDI) | | Input/Output (WDI/WDO) |
|
1s to 2s |
| Adjustable Reset Input | | Manual Reset | | Power Fail Comparator/Low Battery Detect |
|
- |
25 |
| MAX6708 |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
Push-Pull |
85ms to 300ms |
No Watchdog |
- |
| Adjustable Reset Input | | Manual Reset | | Power Fail Comparator/Low Battery Detect |
|
- |
25 |
| MAX6803 |
|
- |
Push-Pull |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms |
|
No Watchdog |
- |
Manual Reset |
- |
12 |
| MAX6804 |
|
Push-Pull |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms |
|
No Watchdog |
- |
Manual Reset |
- |
12 |
| MAX6805 |
|
Open Drain |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms |
|
No Watchdog |
- |
Manual Reset |
- |
12 |
| MAX823 |
| 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
85ms to 300ms |
Input (WDI) |
1s to 2s |
Manual Reset |
- |
24 |
| MAX824 |
| 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
Push-Pull |
85ms to 300ms |
Input (WDI) |
1s to 2s |
- |
- |
24 |
| MAX825 |
| 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
Push-Pull |
85ms to 300ms |
No Watchdog |
- |
Manual Reset |
- |
12 |
| MAX6821 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
- |
Push-Pull |
85ms to 300ms |
Input (WDI) |
1s to 2s |
Manual Reset |
2.5 |
16 |
| MAX6822 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
85ms to 300ms |
Input (WDI) |
1s to 2s |
Manual Reset |
2.5 |
16 |
| MAX6823 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
85ms to 300ms |
Input (WDI) |
1s to 2s |
Manual Reset |
2.5 |
16 |
| MAX6824 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
Push-Pull |
85ms to 300ms |
Input (WDI) |
1s to 2s |
- |
2.5 |
16 |
| MAX6825 |
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
Push-Pull |
85ms to 300ms |
No Watchdog |
- |
Manual Reset |
2.5 |
12 |
|
See All Supervisors (1 Monitored Voltage) (274)
|
| Key Specifications: Supervisors (2 Monitored Voltages) |
| Part Number |
Interface |
Reset Thresh.
(V) |
Reset Out |
Reset Out |
tRESET |
Watchdog Feature |
Watchdog Timeout |
Supervisor Features |
Reset Thresh. Accur.
(%) |
ICC
(µA) |
| Active Low |
Active High |
min |
@ +25°C |
max |
| MAX6760 |
Factory Fixed |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
|
No Watchdog |
- |
| Latched Output | | Manual Reset | | Overvoltage/Window Monitor |
|
1.5 |
23 |
| MAX6761 |
Factory Fixed |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
- |
Push-Pull |
|
No Watchdog |
- |
| Latched Output | | Manual Reset | | Overvoltage/Window Monitor |
|
1.5 |
23 |
| MAX6762 |
Factory Fixed |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
|
No Watchdog |
- |
| Latched Output | | Manual Reset | | Overvoltage/Window Monitor |
|
1.5 |
23 |
| MAX6750 |
| Factory Fixed | | R/C Adjustable |
|
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms | | 300ms to 1s | | <1ms | | >1s | | Adjustable |
|
| Cap Adjustable | | Input (WDI) |
|
|
Adjustable Reset Input |
2 |
10 |
| MAX6751 |
| Factory Fixed | | R/C Adjustable |
|
| 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
| 1ms to 15ms | | 15ms to 85ms | | 85ms to 300ms | | 300ms to 1s | | <1ms | | >1s | | Adjustable |
|
| Cap Adjustable | | Input (WDI) |
|
|
Adjustable Reset Input |
2 |
10 |
| MAX6826 |
Factory Fixed |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
85ms to 300ms |
Input (WDI) |
1s to 2s |
| Adjustable Reset Input | | Manual Reset |
|
2.5 |
16 |
| MAX6827 |
Factory Fixed |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
- |
Push-Pull |
85ms to 300ms |
Input (WDI) |
1s to 2s |
| Adjustable Reset Input | | Manual Reset |
|
2.5 |
16 |
| MAX6828 |
Factory Fixed |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
85ms to 300ms |
Input (WDI) |
1s to 2s |
| Adjustable Reset Input | | Manual Reset |
|
2.5 |
16 |
| MAX6829 |
Factory Fixed |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
85ms to 300ms |
Input (WDI) |
1s to 2s |
Manual Reset |
2.5 |
16 |
| MAX6830 |
Factory Fixed |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
- |
Push-Pull |
85ms to 300ms |
Input (WDI) |
1s to 2s |
Manual Reset |
2.5 |
16 |
| MAX6831 |
Factory Fixed |
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Open Drain |
- |
85ms to 300ms |
Input (WDI) |
1s to 2s |
Manual Reset |
2.5 |
16 |
|
See All Supervisors (2 Monitored Voltages) (84)
|
| Key Specifications: Supervisors (3 Monitored Voltages) |
| Part Number |
Interface |
Reset Thresh.
(V) |
Reset Out |
Reset Out |
tRESET |
Watchdog Feature |
Watchdog Timeout |
Supervisor Features |
ICC
(µA) |
| Active Low |
Active High |
min |
max |
| MAX6701 |
| Factory Fixed | | R/C Adjustable |
|
| 0 to 1.2 | | 1.2 to 1.8 | | 1.8 to 2.5 | | 2.5 to 3.3 | | 3.3 to 5.5 |
|
Push-Pull |
- |
85ms to 300ms |
| Input (WDI) | | Input/Output (WDI/WDO) |
|
1s to 2s |
| Adjustable Reset Input | | Manual Reset |
|
25 |
| MAX6702 |
- |
Push-Pull |
| MAX6703 |
Open Drain |
- |
|
See All Supervisors (3 Monitored Voltages) (32)
|
| Key Specifications: Switches and Multiplexers (Mid Voltage) |
| Part Number |
Functions |
Config. |
Channels |
Normal Position |
VSUPPLY (Single)
(V) |
VSUPPLY (Single)
(V) |
VSUPPLY (Dual)
(±V) |
VSUPPLY (Dual)
(±V) |
RON
(Ω) |
BW
(MHz) |
IL(OFF)
(nA) |
tON
(ns) |
tOFF
(ns) |
QINJECTION
(pC) |
CON
(pF) |
COFF
(pF) |
| min |
max |
min |
max |
max |
max |
min |
max |
max |
max |
| MAX4581 |
Mux |
8:1 |
1 |
- |
2 |
12 |
2 |
6 |
80 |
- |
1 |
200 |
100 |
5 |
25 |
4 |
| MAX4582 |
Mux |
4:1 |
2 |
- |
2 |
6 |
80 |
- |
1 |
200 |
100 |
17 |
4 |
| MAX4583 |
Switch |
SPDT |
3 |
- |
2 |
6 |
80 |
- |
1 |
200 |
100 |
12.5 |
4 |
| MAX4610 |
Switch |
SPST |
4 |
Open |
- |
- |
100 |
300 |
0.1 |
60 |
20 |
23 |
16 |
| MAX4611 |
Switch |
SPST |
4 |
Closed |
- |
- |
100 |
300 |
0.1 |
60 |
20 |
23 |
16 |
| MAX4612 |
Switch |
SPST |
4 |
Open/Closed |
- |
- |
100 |
300 |
0.1 |
60 |
20 |
23 |
16 |
|
See All Switches and Multiplexers (Mid Voltage) (297)
|
|
|
