802.11a/b/g Wireless LAN - Application Notes

Maxim > Solutions > 802.11a/b/g Wireless LAN


		Overview
		Suggested Components
		Application Notes
		New Product Announcements

Application Notes

App note 5100: General Layout Guidelines for RF and Mixed-Signal PCBs
App note 5099: Alarm Sounds When RF Transmitter is Out of Range
App note 5042: Implementing Nonvolatile, Nonresettable Counters for Embedded Systems
App note 5026: Protecting 5V 1-Wire® Slaves from Overvoltage Exposure
App note 4992: Reduce the Chances of Human Error: Part 1, Power and Ground
App note 4931: IEEE 1451.4 Class 1 MMI Smart Transducer Digital Driver Circuit
App note 4717: Injection Molding an IC into a Connector or Consumable Item
App note 4702: Easily Add Memory, Security, Monitoring, and Control to Medical Sensors and Consumables
App note 4691: Introduction to Hearing Aids and Important Design Considerations
App note 4678: Advantages of Internet Protocol (IP) Cameras and H.264 Compression for Security and Surveillance Video
App note 4671: Improve Sensor Performance and SNR in Pulse Oximeter Designs
App note 4651: Web Seminar: Wireless Technology Tutorial
App note 4647: Selecting High-Linearity Mixers for Wireless Base Stations
App note 4623: Smart Cable Aids Quality Control and Authentication
App note 4611: Tuning the MAX2009/MAX2010 RF Predistorters for Optimal Performance
App note 4477: Reference Design of a 1-Wire® Bidirectional Voltage-Level Translator for 1.8V to 5V
App note 4427: Demonstrating Green Technology with Apples, Oranges, Lemons, and Limes
App note 4276: WLAN Reference Design with the MAX2830
App note 4255: How to Power the Extended Features of 1-Wire® Devices
App note 4205: Using the uIP Stack to Network a MAXQ Microcontroller
App note 4163: Telecom Hot-Swap Reference Design Is Immune to Overvoltage and Brownout Input Transients
App note 4162: Reference Design for a Powered-Device (PD) Module Based on the MAX5941B PWM Controller
App note 4161: PoE+ Circuit Delivers 13W to 70W for Powered Devices (PDs)
App note 4156: Reference Design for an 802.11b/g RF Front-End Module Using the MAX2830
App note 4132: Attachment methods for the electro-mechanical SFN package
App note 4044: Tuning the MAX2640 Low-Noise Amplifier (LNA) for a 470MHz to 770MHz ISDB-T Application
App note 4002: Understanding Flip-Chip and Chip-Scale Package Technologies and Their Applications
App note 3989: Add Control, Memory, Security, and Mixed-Signal Functions with a Single Contact
App note 3967: Selecting a Serial Bus
App note 3912: Low-Cost, Complete Power Solution for Powered Devices Includes a 12V Buck Converter
App note 3909: MAX2470/MAX2471 Couple MIMO Transceiver Reference Clocks
App note 3826: Xilinx® FPGA IFF Copy Protection with 1-Wire® SHA-1 Secure Memories
App note 3697: Transition Guide: Replacing the DS2430A with the DS2431
App note 3675: Protecting the R&D Investment—Two-Way Authentication and Secure Soft-Feature Settings
App note 3633: Tuning the MAX2607 EV Kit for High Differential Voltage
App note 3632: Wideband LO Noise in Passive Transmit-Receive Mixer ICs
App note 3630: Power Supply and Ground Design for a WiFi Transceiver
App note 3571: S-Parameter Measurements and Stability Analysis for the MAX2640 LNA
App note 3522: White Paper 9: Are SHA-1 Devices Still Secure Enough?
App note 3507: IEEE 802.3af-Compliant Single-Port, Power-Sourcing-Equipment Application
App note 3505: Assembling High-Lead (Pb) DS2502 Flip-Chips in a Pb-Free Assembly Flow
App note 3503: Clock Generation with Spread Spectrum
App note 3447: Complete Stand-Alone GPS Receiver Solution with MAX2742
App note 3438: Serial Digital Data Networks
App note 3430: A Triple-Output ±5% Regulated High Efficiency POE (Power over Ethernet) Supply
App note 3377: Maxim Wafer-Level Package Assembly Guide
App note 3363: New Ethernet Systems Distribute DC Power with Data
App note 3249: 1.9GHz DECT Power Amplifier Delivers +27dBm from 3.6V at 41% PAE
App note 3240: PHS Power Amplifier Delivers +22dBm at -62/-75dBc ACPR
App note 2966: Minimal Remote 1-Wire® Master Protocol
App note 2965: 1-Wire® Master Device Configuration
App note 2875: Three Methods of Noise Figure Measurement
App note 2870: MAX2605/MAX2606/MAX2608/MAX2609 VCO Phase Noise Measurements
App note 2420: 1-Wire® Communication with a Microchip PICmicro Microcontroller
App note 2400: A Compact 36-72V DC Input, 3.3V/10A Output Power Supply
App note 244: Advanced 1-Wire Network Driver
App note 2043: A Compact, Isolated Power Supply, 48V to 3.3V at 7A
App note 2019: Buffer Amplifiers Solve VCO Problems
App note 1996: MAX2247 Power Amplifier for 802.11g WLAN
App note 1962: TD-SCDMA Reference Design V1.0
App note 1836: Improving Receiver Sensitivity with External LNA
App note 1826: Satellite Radio Receiver 1st Mixer: MAX2682 Tuned for 2642.5MHz
App note 1820: White Paper 1: SHA Devices Used in Small Cash Systems
App note 1768: Tracking Advances in VCO Technology
App note 1759: LNA Tuned for the 433.05MHz to 434.79MHz European ISM Band
App note 1201: White Paper 8: 1-Wire® SHA-1 Overview
App note 214: Using a UART to Implement a 1-Wire Bus Master
App note 1100: White Paper 5: Using 1-Wire APIs for Data Sheet Commands
App note 1099: White Paper 4: Glossary of 1-Wire SHA-1 Terms
App note 1098: White Paper 3: Why are 1-Wire SHA-1 Devices Secure?
App note 1097: White Paper 2: Using the 1-Wire® Public Domain Kit
App note 887: REP032: Lumped Element Output Match for the MAX2240 Nonlinear 2.45GHz Power Amplifier (PA)
App note 890: Silicon Germanium (SiGe) Downconverter Tuned for GPS Receivers
App note 957: The MAX2681 SiGe Downconverter Mixer Tuned for GPS Front Ends
App note 1008: Optimize the MAX2242 PA for 2.4GHz DECT Cordless Phone Applications
App note 187: 1-Wire Search Algorithm
App note 190: Challenge and Response with 1-Wire® SHA Devices
App note 192: Using the DS2480B Serial 1-Wire® Line Driver
App note 155: 1-Wire® Software Resource Guide Device Description
App note 151: Maxim Digital Monetary Certificates
App note 154: Passwords in SHA Authentication
App note 186: Creating Global Identifiers Using 1-Wire® Devices
App note 178: Printed Circuit Board Identification Using 1-Wire® Products
App note 800: Design a Low-Jitter Clock for High-Speed Data Converters
App note 148: Guidelines for Reliable Long Line 1-Wire® Networks
App note 806: RF ICs for 3.5GHz WLL Transceivers
App note 114: 1-Wire File Structure
App note 620: REP025: Custom-Tuned LNA at 345MHz for Wireless Security System
App note 1985: LNA Optimized for GPS (REP024)
App note 1990: The MAX2242 Power Amplifier: Crucial Application Issues
App note 602: RF IC Building Block Solutions for GPS
App note 579: Bluetooth Power Amplifier: System Performance Review
App note 584: +23dBm PA and PA Predriver with 37% Efficiency for 2.4GHz FHSS WLAN Applications
App note 74: Reading and Writing 1-Wire® Devices Through Serial Interfaces
App note 27: Understanding and Using Cyclic Redundancy Checks with Maxim iButton Products
App note 742: Impedance Matching and the Smith Chart: The Fundamentals
App note 732: Novel Approach Yields 100mW Bluetooth Amplifier
App note 120: Using an API to Control the DS1WM 1-Wire® Bus Master
App note 2032: Trimless IF VCO: Part 1: Design Considerations
App note 688: Trimless IF VCO: Part 2: New ICs Simplify Implementation
App note 119: Embedding the 1-Wire® Master in FPGAs or ASICs
App note 440: REP004: LNA for 2.35GHz Mobile Data Receiver
App note 335: Maxim Wireless/RF Power Amplifier Selector Guide
App note 282: MAX2721 Direct-Frequency Upconverter Minimizes Chip Count and Is Ideal for Wideband Application
App note 698: Silicon-Bipolar IC Facilitates VCO Design
App note 126: 1-Wire® Communication Through Software
App note 697: Silicon Germanium (SiGe) Technology Enhances Radio Front-End Performance
App note 1210: Crystal Oscillator Has Dual or Differential Outputs