The MAX9532 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that evaluates the MAX9532 IC. The MAX9532 amplifies standard-definition video signals and sets the video black level near ground while consuming minimal power. The MAX9532 also provides integrated short-to-battery protection allowing the output of the device to survive shorts up to 18V. The EV kit operates from a 3V to 3.6V single power supply.
The MAX9532 provides an internal fixed gain of 4V/V and has an internal reconstruction filter that typically has ±1dB passband flatness of 9.5MHz and 42dB attenuation at 27MHz. The MAX9532 EV kit accepts a 1VP-P input full-scale video signal and attenuates it down to 0.5VP-P (nominal), then provides an output full-scale video signal of 2VP-P (nominal).
Key Features
Applications/Uses
Single 3V to 3.6V Supply Operation
Short-to-Battery Protection on Video Output (Up to 18V)
DC-Coupled Input with Option for AC-Coupling
DC-Coupled Output
Video Output Black Level Set Near Ground
Reconstruction Filter with 42dB Attenuation at 27MHz and ±1dB Passband to 9.5MHz
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1 of 1
MAX9532EVKIT
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX9532EVKIT+
Active
Land Pattern: Not Available
See data sheet
Related Products
MAX9532 DirectDrive Video Amplifier with Short-to-Battery Protection
Download
E-Mail