The MAX1907A/MAX1981A are single-phase, Quick-PWM™ master controllers for IMVP-IV™ CPU core supplies. Multiphase operation is achieved using a Quick-PWM slave controller (MAX1980). Multiphase operation reduces input ripple current requirements and output voltage ripple while easing component selection and layout difficulties. The MAX1907A/MAX1981A include active voltage positioning with adjustable gain and offset, reducing power dissipation
and bulk output capacitance requirements.
The MAX1907A/MAX1981A are intended for two different notebook CPU core applications: either bucking down the battery directly, or 5V system supply to create the core voltage. The single-stage conversion method allows these devices to directly step down high-voltage batteries for the highest possible efficiency. Alternatively, two-stage conversion (stepping down the 5V system supply instead of the battery) at higher switching frequency provides the minimum possible physical size.
The MAX1907A/MAX1981A meet the IMVP-IV specifications and include logic to interface with the CPU power good signals from the VCCP and VCCMCH rails within the system. The regulator features power-up sequencing, automatically ramping up to the Intel-specified boot voltage. The MAX1907A/MAX1981A feature independent four-level logic inputs for setting the boot voltage (B0–B2) and the suspend voltage (S0–S2).
The MAX1907A/MAX1981A include output undervoltage protection, thermal protection, and system power-OK (SYSPOK) input/output. When any of these protection features detect a fault, the MAX1907A/MAX1981A immediately shut down. Additionally, the MAX1907A includes overvoltage protection.
The MAX1907A/MAX1981A are available in a thin 40-pin QFN package.
Key Features
Applications/Uses
Quick-PWM Master Controllers
Multiphase Conversion with Slave Controller (MAX1980)
Active Voltage Positioning with Adjustable Gain and Offset
Adjustable Slew Rate Control
±0.75% VOUT Accuracy Over Line, Load, and Temperature
6-Bit On-Board DAC (16mV Increments)
0.700V to 1.708V Output Adjust Range
Selectable 200kHz/300kHz/550kHz/1000kHz Switching Frequency
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4 of 4
MAX1907A
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX1907AETL
Active
TQFN;40 pin;37.2 mm²
Outline Drawing: 21-0141 (PDF)
Land Pattern: 90-0055 (PDF)
Use pkgcode/variation: T4066-5*
Download
E-Mail