The DS4625 is a dual-output, low-jitter clock oscillator capable of producing frequency output pair combinations ranging from 100MHz to 625MHz. The device combines an AT-cut crystal, an oscillator, and a low-noise phase-locked loop (PLL) in a 5.0mm x 3.2mm surface-mount LCCC package. Standard frequency options are listed in the Ordering Information/Selector Guide table in the full data sheet. For custom frequency options, contact the factory at: .
The DS4625 provides dual, low-voltage, positive emitter-coupled logic (LVPECL) clock output drivers. The output drivers can be enabled and disabled through the OE pin, which is an active-high CMOS input that has an internal pullup resistor. When high, both output pairs are enabled.
The device operates from a single +3.3V ±10% supply. The operating temperature range is -40°C to +70°C.
Key Features
Applications/Uses
Standard Clock Output Frequencies: 100MHz, 125MHz, 150MHz, 156.25MHz, and 200MHz
Phase Jitter < 0.7ps RMS (typical) from 12kHz to 20MHz
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-5 of 5
DS4625
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
DS4625P+125/125
Active
LCC;10 pin;16 mm²
Outline Drawing: 21-0389 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: L1053+H2*
-40°C to +85°C
See data sheet
DS4625P+125/156
Active
LCC;10 pin;16 mm²
Outline Drawing: 21-0389 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: L1053+H2*
-40°C to +85°C
See data sheet
DS4625P+150/150
Active
LCC;10 pin;16 mm²
Outline Drawing: 21-0389 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: L1053+H2*
-40°C to +85°C
See data sheet
DS4625P+150/200
Active
LCC;10 pin;16 mm²
Outline Drawing: 21-0389 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: L1053+H2*
-40°C to +85°C
See data sheet
DS4625P+100/150
Active
LCC;10 pin;16 mm²
Outline Drawing: 21-0389 (PDF)
Land Pattern: Not Available
Use pkgcode/variation: L1053+H2*