The MAX9406 PCIe®-To-HDMI™ evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the capabilities of the MAX9406 DisplayPort™ to DVI™/HDMI level shifter. The correct version of the Intel graphics chipset driver and video BIOS need to be installed properly to use the MAX9406 EV kit.
The MAX9406 EV kit should be plugged into a PCI Express® (PCIe) bus slot on a PC that supports DisplayPort as defined by VESA, such as Intel's Eaglelake/Cantiga chipset with an integrated graphics controller.
The MAX9406 EV kit PCB comes with a MAX9406ETJ+ installed (32-pin thin QFN package with an exposed pad).
Key Features
Applications/Uses
> 400mV Differential HDMI Output at 2Gbps Data Rate
< 450ps Propagation Delay
< 20ps Channel-to-Channel Skew at 2Gbps
Low Intrinsic Jitter: DJ < 7psP-P and RJ < 1psRMS
Human Body Model (HBM) is ±4kV on All Pins and CDM is ±1kV on Cable Connection Pins
Bidirectional Level Shifter of 5V to 3.3V for Display Data Channel (DDC) Pins
Level Shifter of 5V to 3.3V for the Hot-Plug Detection (HPD) Pin
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Download
E-Mail