The MAX13170E is a three-driver/three-receiver multiprotocol transceiver that operates from a +5V single supply. The MAX13170E, along with the MAX13172E and the MAX13174E, form a complete software-selectable data terminal equipment (DTE) or data communication equipment (DCE) interface port that supports the V.28 (RS-232), V.10/V.11 (RS-449/V.36, EIA-530, EIA-530A, X.21), and V.35 protocols. The MAX13170E transceivers carry the high-speed clock and data signals, while the MAX13172E carry the control signals. The MAX13170E can be terminated by the MAX13174E software-selectable resistor termination network or by discrete termination networks.
The MAX13170E has an internal charge pump and a proprietary low-dropout transmitter output stage that allows V.11-, V.28-, and V.35-compliant operation from a +5V single supply. The MAX13170E features a nocable mode that reduces supply current to 0.5µA, and disables all (high-impedance) transmitter and receiver outputs. Short-circuit current limiting and thermal shutdown circuitry protect the receiver and transmitter outputs against excessive power dissipation. The MAX13170E has extended ESD protection for all the transmitter outputs and receivers inputs.
The MAX13170E is available in a 5.3mm x 10.2mm, 28-pin SSOP package and operates over the 0°C to +70°C commercial temperature range.
Key Features
Applications/Uses
The MAX13170E/MAX13172E/MAX13174E Chipset is a Pin-for-Pin Upgrade to the MXL1544/MAX3175/MXL1543/MXL1543B Chipset
Supports RS-232, RS-449, EIA-530, EIA-530A, V.35, V.36, and X.21
Software-Selectable Cable Termination Using the MAX13174E
Complete DTE or DCE Port with the MAX13172E/MAX13174E
Fail-Safe Receivers
+5V Single-Supply Operation
0.5µA No-Cable Mode
TUV-Certified NET1/NET2 and TBR1/TBR2-Compliant (Pending)
Extended ESD Protection for All the Transmitter Outputs and Receivers Inputs to GND
±13kV Using the Human Body Model
±8kV Using the Contact Method Specified in IEC 61000-4-2
±5kV Using the Air-Gap Discharge Method Specified in IEC 61000-4-2
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-2 of 2
MAX13170E
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX13170ECAI
Active
SSOP;28 pin;82 mm²
Outline Drawing: 21-0056 (PDF)
Land Pattern: 90-0095 (PDF)
Use pkgcode/variation: A28-2*
This Clock/Data transceiver is a pin-for-pin upgrade to the MXL1543B. The MAX13170E, MAX13172E and MAX13174E form a complete chipset upgrade to the existing MXL1543B, MXL1544, and MXL1344 Multiprotocol Chipset.
Download
E-Mail