The MAX4950 PCI Express (PCIe®) quad equalizer/redriver operates from a single +3.3V supply. This device improves signal integrity at the receiver through programmable input equalization and programmable redrive circuitry. The output circuitry reestablishes deemphasis lost on the board, compensating for circuit board loss. This device permits optimal placement of key PCIe components and longer runs of stripline, microstrip, or cable.
The MAX4950 contains four identical buffers capable of equalizing differential signals at data rates up to 5GT/s, and features electrical idle and receiver detection on each channel. The MAX4950 is ideal for use with PCIe Gen I (2.5GT/s) and Gen II (5.0GT/s) data rates and features a power-saving mode.
The MAX4950 is available in a small, lead-free, 42-pin (3.5mm x 9.0mm) TQFN package for optimal layout and minimal space requirements. The board traces are flow-through for ease of layout. The MAX4950 is specified over the 0°C to +70°C operating temperature range.
Key Features
Applications/Uses
Single +3.3V Supply Operation
Generation I (2.5GT/s) and Generation II (5.0GT/s) Capable
Return Loss: = 10dB (f ≤ 1.25GHz)
≥ 8dB (f ≤ 2.5GHz)
Very Low Latency
280ps Propagation Delay
Individual Lane Detection
Low Lane-to-Lane Skew: ±50ps
Total Jitter ≤ 35psP-P at BER = 10-12
Three-Level-Programmable Input Equalization
Three-Level-Programmable Output Deemphasis
On-Chip 50Ω Input/Output Terminations
±2kV Human Body Model (HBM) Protection on All Pins
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-2 of 2
MAX4950
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX4950CTO+
Active
TQFN;42 pin;32.8 mm²
Outline Drawing: 21-0181 (PDF)
Land Pattern: 90-0078 (PDF)
Use pkgcode/variation: T423590+1*
