The MAX15003 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed-circuit board (PCB) that demonstrates the capabilities of the MAX15003 IC. The MAX15003 IC is a high-performance triple-output synchronous buck controller, capable of delivering up to 10A per output with tracking and sequencing capability. The EV kit requires a DC input-voltage range of 6V to 14V (12V typ) for normal operation.
The EV kit outputs are configured for 3.3V, 2.5V, and 1.2V, and provide 3A, 4A, and 10A, respectively. The MAX15003 IC switching frequency is programmed to 600kHz or can be synchronized to an external clock signal with a frequency of up to 2.2MHz. The phase-and-tracking/sequencing operation modes are configurable. The PGOOD1, PGOOD2, PGOOD3, and active-low RESET logic signal output pads are provided for circuit monitoring.
Key Features
Applications/Uses
Triple-Output Power Supply
VOUT1 (3.3V, 3A)
VOUT2 (2.5V, 4A)
VOUT3 (1.2V, 10A)
600kHz PWM Switching
Programmable Switching Frequency Up to 2.2MHz
External Frequency Synchronization
Selectable Tracking or Sequencing Operation Mode
Selectable Phase Operation Mode
Individual PGOOD and Active-Low RESET Signal Outputs
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1
of
1
MAX15003EVKIT
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX15003EVKIT+
Land Pattern: Not Available
See data sheet
Related Products
MAX15003 Triple-Output Buck Controller with Tracking/Sequencing
Download
E-Mail