The MAX9877 combines a high-efficiency Class D audio power amplifier with a stereo Class AB capacitor-less DirectDrive® headphone amplifier. Maxim's 3rd generation, filterless Class D amplifier with active emissions limiting technology provides Class AB performance with Class D efficiency.
The MAX9877 delivers up to 725mW from a 3.7V supply into an 8Ω load with 87% efficiency to extend battery life. The filterless modulation scheme combined with active emissions limiting circuitry and spread-spectrum modulation greatly reduces EMI while eliminating the need for output filtering used in traditional Class D devices.
The stereo Class AB headphone amplifier in the MAX9877 uses Maxim's patented DirectDrive architecture, that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space, and component height.
The device utilizes a user-defined input architecture, three preamplifier gain settings, an input mixer, volume control, comprehensive click-and-pop suppression, and I²C control. A bypass mode feature disables the integrated Class D amplifier and utilizes an internal DPST switch to allow an external amplifier to drive the speaker that is connected at the outputs of the MAX9877.
The MAX9877 is available in a thermally efficient, space-saving 20-bump WLP package.
Key Features
Applications/Uses
Low Emissions, Filterless Class D Amplifier Achieves Better than 10dB Margin Under EN55022 Class B Limits
Low RF Susceptibility Design Rejects TDMA Noise from GSM Radios
Input Mixer with User-Defined Input Mode
725mW Speaker Output (RSPK = 8Ω, PVDD = 3.7V)
53mW Headphone Output (RHP = 16Ω, VDD = 3.7V)
Low 0.05% THD+N at 1kHz (Class D Power Amplifier)
Low 0.016% THD+N at 1kHz (Headphone Amplifier)
87% Efficiency (RSPK = 8Ω, POUT = 750mW)
1.6Ω Analog Switch for Speaker Amplifier Bypass
High Speaker Amplifier PSRR (72dB at 217Hz)
High Headphone Amplifier PSRR (84dB at 217Hz)
I²C Control
Hardware and Software Shutdown Mode
Click-and-Pop Suppression
Current-Limit and Thermal Protection
Available in a Space-Saving, 2.5mm x 2.0mm WLP Package
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1
of
1
MAX9877
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX9877EWP+TG45
WLP;20 pin;
Dwg: 21-0059 (PDF)
Use pkgcode/variation: W202A2+2*
Download
E-Mail
