The DS1841 is a 7-bit, logarithmic, nonvolatile (NV) digital resistor that features an on-chip temperature sensor and associated analog-to-digital converter (ADC). The integrated temperature sensor indexes a 72-byte NV lookup table (LUT) encompassing a temperature range from -40°C to +100°C. The LUT output can drive the resistor directly or be added to an NV initial-value register (IVR) to drive the resistor. This flexible LUT-based architecture allows the DS1841 to provide a temperature-compensated resistor output with arbitrary slope. Programming is accomplished by an I²C-compatible interface, which can operate at speeds of up to 400kHz.
Key Features
Applications/Uses
22kΩ to 3.7kΩ Adjustable Logarithmic Resistor with a 3.6kΩ Fixed Resistor
128 Wiper Tap Points
On-Chip Temperature Sensor and ADC
72-Byte Lookup Table (LUT)
I²C-Compatible Serial Interface
Address Pins Allow Up to Four DS1841s to Share the Same I²C Bus
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1 of 1
DS1841
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
DS1841N+T&R
Active
TDFN-EP;10 pin;10 mm²
Outline Drawing: 21-0137 (PDF)
Land Pattern: 90-0003 (PDF)
Use pkgcode/variation: T1033+1*
Download
E-Mail