The MAX15024/MAX15025 single/dual, high-speed MOSFET gate drivers are capable of operating at frequencies up to 1MHz with large capacitive loads. The MAX15024 includes internal source-and-sink output transistors with independent outputs allowing for control of the external MOSFET's rise and fall time. The MAX15024 is a single gate driver capable of sinking an 8A peak current and sourcing a 4A peak current. The MAX15025 is a dual gate driver capable of sinking a 4A peak current and sourcing a 2A peak current. An integrated adjustable LDO voltage regulator provides gate-drive amplitude control and optimization.
The MAX15024A/C and MAX15025A/C/E/G accept transistor-to-transistor (TTL) input logic levels while the MAX15024B/D and MAX15025B/D/F/H accept CMOS-input
logic levels. High sourcing/sinking peak currents, a low propagation delay, and thermally enhanced packages make the MAX15024/MAX15025 ideal for high-frequency
and high-power circuits. The MAX15024/MAX15025 operate from a 4.5V to 28V supply. A separate output driver supply input enhances flexibility and permits a soft-start of the power MOSFETs used in synchronous rectifiers.
The MAX15024/MAX15025 are available in 10-pin TDFN packages and are specified over the -40°C to +125°C automotive temperature range.
Key Features
Applications/Uses
8A Peak Sink Current/4A Peak Source Current (MAX15024)
4A Peak Sink Current/2A Peak Source Current (MAX15025)
Low 16ns Propagation Delay
4.5V to 28V Supply Voltage Range
On-Board Adjustable LDO for Gate-Drive Amplitude Control and Optimization
Separate Output Driver Supply
Independent Source and Sink Outputs (MAX15024)
Matched Delays Between Inverting and Noninverting Inputs (MAX15024)
Matched Delays Between Channels (MAX15025)
CMOS or TTL Logic-Level Inputs with Hysteresis for Noise Immunity
Download
E-Mail
