The MAX2065 high-linearity, analog/digital variable-gain amplifier (VGA) is designed to operate in the 50MHz to 1000MHz frequency range with two independent attenuators (see the Typical Application Circuit in the full data sheet). The digital attenuator is controlled as a slave peripheral using either the SPI™-compatible interface or a parallel bus with 31dB total adjustment range in 1dB steps. An added feature allows "rapid-fire" gain selection between each of four steps, preprogrammed by the user through the SPI-compatible interface. The 2-pin control allows the user to quickly access any one of four customized attenuation states without reprogramming the SPI bus. The analog attenuator is controlled using an external voltage or through the SPI-compatible interface using an on-chip 8-bit DAC.
Because each of the three stages has its own RF input and RF output, this component can be configured to either optimize NF (amplifier configured first), OIP3 (amplifier last), or a compromise of NF and OIP3. The device's performance features include 22dB amplifier gain (amplifier only), 6.5dB NF at maximum gain (includes attenuator insertion losses), and a high OIP3 level of +42dBm. Each of these features makes the MAX2065 an ideal VGA for numerous receiver and transmitter applications.
In addition, the MAX2065 operates from a single +5V supply with full performance, or a single +3.3V supply with slightly reduced performance, and has an adjustable bias to trade current consumption for linearity performance. This device is available in a compact 40-pin thin QFN package (6mm x 6mm) with an exposed pad. Electrical performance is guaranteed over the extended temperature range (TC = -40°C to +85°C).
Key Features
Applications/Uses
50MHz to 1000MHz RF Frequency Range
Pin-Compatible Family Includes:
MAX2066 (Digital VGA)
MAX2067 (Analog VGA)
+19.4dB (Typ) Maximum Gain
0.5dB Gain Flatness Over 100MHz Bandwidth
62dB Gain Range (31dB Analog + 31dB Digital)
Built-in DAC for Analog Attenuation Control
Supports Four "Rapid-Fire" Preprogrammed Attenuator States
Quickly Access Any One of Four Customized Attenuation States Without Reprogramming the SPI Bus
Ideal for Fast-Attack, High-Level Blocker Protection
Prevents ADC Overdrive Condition
Excellent Linearity (Configured with Amplifier Last)
+42dBm OIP3
+63dBm OIP2
+19dBm Output 1dB Compression Point
-67dBc HD2
-83dBc HD3
6.5dB Typical Noise Figure (NF)
Fast, 25ns Digital Switching
Very Low Digital VGA Amplitude Overshoot/Undershoot
Single +5V Supply (Optional +3.3V Operation)
External Current-Setting Resistors Provide Option for Operating Device in Reduced-Power/Reduced-Performance Mode
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4
of
4
MAX2065
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX2065EVKIT
See data sheet
MAX2065EVKIT#
See data sheet
MAX2065ETL+T
THIN QFN;40 pin;
Dwg: 21-0141 (PDF)
Use pkgcode/variation: T4066+3*
MAX2058 700MHz to 1200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer MAX2059 1700MHz to 2200MHz, High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer MAX2027 IF Digitally Controlled Variable-Gain Amplifier MAX2055 Digitally Controlled, Variable-Gain, Differential ADC Driver/Amplifier MAX2056 800MHz to 1000MHz Variable-Gain Amplifier with Analog Gain Control MAX2057 1700MHz to 2500MHz Variable-Gain Amplifier with Analog Gain Control MAX2066 50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA MAX2067 50MHz to 1000MHz High-Linearity, Serial/Analog-Controlled VGA
Download
E-Mail
