The MAX17003A/MAX17004A are dual step-down, switch-mode, power-supply (SMPS) controllers with synchronous rectification, intended for main 5V/3.3V power generation in battery-powered systems. Fixed-frequency operation with optimal interleaving minimizes input ripple current from the lowest input voltages up to the 26V maximum input. Optimal 40/60 interleaving allows the input voltage to go down to 8.3V before duty-cycle overlap occurs, compared to 180° out-of-phase regulators where the duty-cycle overlap occurs when the input drops below 10V.
Output current sensing provides peak current-limit protection, using either an accurate sense resistor or using lossless inductor DCR current sensing. A low-noise mode maintains high light-load efficiency while keeping the switching frequency out of the audible range.
An internal, fixed 5V, 100mA linear regulator powers up the MAX17003A/MAX17004A and their gate drivers, as well as external keep-alive loads. When the main PWM regulator is in regulation, an automatic bootstrap switch bypasses the internal linear regulator, providing current up to 200mA. An additional adjustable linear-regulator driver with an external pnp transistor can be used with a secondary winding to provide a 12V supply, or powered directly from the main outputs to generate low-voltage outputs as low as 1V.
Independent enable controls and power-good signals allow flexible power sequencing. Voltage soft-start gradually ramps up the output voltage and reduces inrush current, while soft-discharge gradually decrease the output voltage, preventing negative voltage dips. The MAX17003A/MAX17004A feature output undervoltage and thermal-fault protection. The MAX17003A also includes output overvoltage-fault protection.
The MAX17003A/MAX17004A are available in a 32-pin, 5mm x 5mm thin QFN package. The exposed backside pad improves thermal characteristics for demanding linear keep-alive applications.
Key Features
Applications/Uses
Fixed-Frequency, Current-Mode Control
40/60 Optimal Interleaving
Internal BST Switches
Internal 5V, 100mA Linear Regulator
Auxiliary Linear-Regulator Driver (12V or Adjustable Down to 1V)
Dual Mode™ Feedback—3.3V/5V Fixed or Adjustable Output Voltages
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
This product cannot be purchased through our web site. Contact factory for availability.
Related Products
More Like This: View Product Families for Similar Products
Download
E-Mail