The VSC060 enhanced high-density I²C backplane controller is a CMOS integrated circuit that enables a system designer to reduce system cost by integrating all the digital logic typically required in a storage enclosure. The VSC060 can be used in any embedded control application including parallel SCSI, Fibre Channel, SAS, or SATA where the monitoring and control of a large number of digital I/O signals is required. Programming the VSC060 is easy through a convenient programming model, which reduces the overall duration of the design-in cycle. Data is read and written to the device over an addressable (3-bit) I²C serial interface, allowing multiple VSC060 devices on a single I²C bus.
To receive additional supporting documentation for this device, email .
Key Features
Applications/Uses
Up to 96 Bits of User-Definable, Bidirectional, General-Purpose I/O (5V Tolerant)
Slave Mode I²C Serial Interface
Integrated Port Bypass, Clock Recovery, and Signal Detect Support for Up to 16 Drives
Eight Programmable Fan-Speed-Monitoring Inputs
Eight Programmable Pulse-Width-Modulated Fan Control Outputs
Pairing of GPIO Pins for Direct Input/Output Signal Routing/Buffering
Two Clock Input Ranges: 8.0MHz to 12.5MHz (Crystal or External Clock Source) or 32.0MHz to 75.0MHz (External Clock Source)
Pin-Programmable Addressing for Up to 16 Devices on a Single Serial Bus
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-2 of 2
VSC060
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
VSC060KM
Active
LQFP;144 pin;493 mm²
Outline Drawing: 21-0299 (PDF)
Land Pattern: 90-0296 (PDF)
Use pkgcode/variation: C144L-2*
Download
E-Mail