The MAX2112 low-cost, direct-conversion tuner IC is
designed for satellite set-top and VSAT applications.
The IC is intended for 8PSK and Digital Video
Broadcast (DVB-S2) applications.
The MAX2112 directly converts the satellite signals
from the LNB to baseband using a broadband I/Q
downconverter. The operating frequency range extends
from 925MHz to 2175MHz.
The device includes an LNA and an RF variable-gain
amplifier, I and Q downconverting mixers, and baseband
lowpass filters with programmable cutoff frequency control
and digitally controlled baseband variable-gain amplifiers.
Together, the RF and baseband variable-gain amplifiers
provide more than 80dB of gain control range. The IC is
compatible with virtually all DVB-S2 demodulators.
The MAX2112 includes fully monolithic VCOs, as well as
a complete fractional-N frequency synthesizer.
Additionally, an on-chip crystal oscillator is provided
along with a buffered output for driving additional tuners
and demodulators. Synthesizer programming and device
configuration are accomplished with a 2-wire serial interface.
The IC features a VCO autoselect (VAS) function
that automatically selects the proper VCO. For multituner
applications, the device can be configured to have one
of two 2-wire interface addresses. A low-power standby
mode is available whereupon the signal path is shut
down while leaving the reference oscillator, digital interface,
and buffer circuits active, providing a method to
reduce power in single and multituner applications.
The MAX2112 is the most advanced DBS tuner available
today. The low noise figure eliminates the need for
an external LNA. A small number of passive components
are needed to form a complete DVB-S2 RF front-end
solution. The tuner is available in a very small
28-pin thin QFN package.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4 of 4
MAX2112
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX2112CTI+T
Active
Land Pattern: Not Available
0°C to +70°C
See data sheet
MAX2112CTI+
Active
TQFN;28 pin;26 mm²
Outline Drawing: 21-0140 (PDF)
Land Pattern: 90-0023 (PDF)
Use pkgcode/variation: T2855+3*