The MAX8795A evaluation kit (EV kit) is a fully assembled
and tested surface-mount printed-circuit board
(PCB) that contains a step-up switching regulator, a
positive charge pump postregulated by a high-voltage
linear regulator, a negative charge pump postregulated
by a high-voltage negative linear regulator, and five
high-current operational amplifiers (op amps). The primary
step-up converter is configured for a +14V output
(VMAIN) and provides at least 500mA from a +4.5VDC
supply voltage.
The positive and negative linear-regulator controllers
postregulate the charge-pump outputs for TFT gate-on
and gate-off supplies. The positive linear regulator is
set to +25V output (VPOS) and provides at least 20mA.
The negative linear regulator is set to -10V output
(VNEG) and provides at least 50mA. Power to the positive
charge-pump input comes from the step-up switching-regulator output, while power to the negative charge-pump input comes from the power ground.
The EV kit also features five high-performance op amps
designed to drive the LCD backplane (VCOM). Power
to the VCOM buffers comes from the step-up switching
regulator output. The MAX8795A EV kit demonstrates
low quiescent current and high efficiency for maximum
battery life. High-frequency (1.2MHz) operation allows
the use of tiny surface-mount components to minimize
the thickness of LCD panel designs.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1 of 1
MAX8795AEVKIT
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX8795AEVKIT+
Active
Land Pattern: Not Available
See data sheet
Related Products
MAX8795A TFT-LCD DC-DC Converter with Operational Amplifiers
Download
E-Mail