The MAX9513 evaluation kit (EV kit) is a fully assembled
and tested surface-mount printed circuit board (PCB)
that contains a MAX9513 IC. The MAX9513 is a video
filter amplifier with SmartSleep and bidirectional video
support for standard-definition television (SDTV) applications.
The filter's passband is 6.75MHz. The two
amplifiers each have +6dB gain and can drive a 2VP-P
video signal into two DC-coupled 150Ω loads to ground
or one AC-coupled 150Ω load.
The MAX9513 EV kit can be configured to select
between two sets of input signals: internal or external.
The EV kit provides a connector that supports bidirectional
video signals. A sync-tip clamped input is also
available for processing external signals.
The MAX9513 includes a SmartSleep feature that
reduces the supply current when no video input signal
is detected or when an output load is removed.
The EV kit has two video input signals, one DC-coupled
and one AC-coupled. The video output signals from the
EV kit can be DC- or AC-coupled. The MAX9513 video
input terminals have a 75Ω termination resistor to
ground and the output terminals have a 75Ω back termination
resistor. The EV kit operates from a single 2.7V
to 3.6VDC power supply.
Key Features
Applications/Uses
Standard-Definition Video Reconstruction Filters
Dual Output Amplifier with a +6dB Gain
Drives Two DC-Coupled 150Ω Loads to Ground or One AC-Coupled 150Ω Load
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1 of 1
MAX9513EVKIT
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX9513EVKIT+
Active
Land Pattern: Not Available
See data sheet
Related Products
MAX9513 CVBS Video Filter Amplifier with SmartSleep and Bidirectional Video Support
Download
E-Mail