The MAX2599 complete monolithic direct-conversion I/Q transmitter is designed for WCDMA/HSPA femto basestation transmitter applications. The device is TS25.104 compliant in the 2110MHz to 2170MHz band.
The unique bits-to-RF architecture of the MAX2599 integrates a power amplifier (PA), a quadrature mixer, variable-gain RF and baseband amplifiers, baseband filters, I and Q digital-to-analog converters (DACs), and a fractional-N frequency synthesizer for local oscillator (LO) generation. Data is transferred from the baseband/DSP to the radio by a digital 1-bit sigma-delta modulated I and Q bitstream through an LVDS-like interface. The operating mode of the radio is fully programmable by a 3-wire serial interface.
The MAX2599 is specified for operation in the extended -40°C to +85°C temperature range and is available in a 9mm x 9mm x 1.4mm fcLGA package with exposed paddle (EP).
Key Features
Applications/Uses
Complete Digital Bits-to-RF Output Tx Radio Subsystem
17.5dBm at -52dBc ACLR with 16-Channel Downlink
Supports UMTS Bands I and IV Downlink
MAX-PHY Digital Tx Interface with Single-Bit I and Q Bitstreams
70dB Integrated Power Control
Complete Reference Design Incorporating MAX2547 Receiver Available
On-Chip Fractional-N Frequency Synthesizers for LO Generation
Operation Controlled Entirely by 3-Wire Serial Interface; No Analog Control Signals Necessary
Two General-Purpose Digital Outputs Programmable Through 3-Wire Serial Interface
9mm x 9mm Module Includes Final Stage Matching
WCDMA/HSPA Femto Basestations: UMTS Band Class I and UMTS Band Class IV
Key Specifications:
Femto RF Transmitters
Part Number
Applications
Band/Freq (MHz)
Features
Footprint (mm x mm)
Package
RoHS Available
MAX2599
•
WCDMA/HSPA Band I Femto Basestations
2110 to 2170
•
17dBm @ -52dBc ACLR with 16-Channel Downlink
•
Complete Digital Bits-to-RF Output TX Radio Subsystem
