Create a design and simulate with EE-Sim: [MAX8664]
The MAX8664 dual-output PWM controller is a low-cost, high-performance solution for systems requiring dual power supplies. It provides two individual outputs that operate 180° out-of-phase to minimize input current ripple, and therefore, capacitance requirements. Built-in drivers are capable of driving external MOSFETs to deliver up to 25A output current from each channel. The MAX8664 operates from a 4.5V to 28V input voltage source and generates output voltages from 0.6V up to 90% of the input voltage on each channel. Total output regulation error is less than ±0.8% over load, line, and temperature.
The MAX8664 operates with a constant switching frequency adjustable from 100kHz to 1MHz. Built-in boost diodes reduce external component count. Digital soft-start eliminates input inrush current during startup. The second output has an optional external REFIN2, facilitating tracking supply applications. Each output is capable of sourcing and sinking current, making the device a great solution for DDR applications.
The MAX8664 employs Maxim's proprietary peak voltage-mode control architecture that provides superior transient response during either load or line transients.
This architecture is easily stabilized using two resistors and one capacitor for any type of output capacitors. Fast transient response requires less output capacitance, consequently reducing total system cost. The MAX8664B latches off both controllers during a fault condition, while the MAX8664A allows one controller to continue to function when there is a fault in the other controller.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4 of 4
MAX8664
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX8664AEEP+
Active
QSOP;20 pin;54.2 mm²
Outline Drawing: 21-0055 (PDF)
Land Pattern: 90-0168 (PDF)
Use pkgcode/variation: E20+1*
MAX5066 Configurable, Single-/Dual-Output, Synchronous Buck Controller for High-Current Applications MAX1858 Dual 180° Out-of-Phase PWM Step-Down Controller with Power Sequencing and POR MAX8537, MAX8538, MAX8539 Dual-Synchronous Buck Controllers for Point-of-Load, Tracking, and DDR Memory Power Supplies MAX1858A, MAX1875A, MAX1876A Dual 180° Out-of-Phase Buck Controllers with Sequencing/Prebias Startup and POR
Download
E-Mail
