The DS4026 is a temperature-compensated crystal oscillator (TCXO) that provides ±1ppm frequency stability over the -40°C to +85°C industrial temperature range. The DS4026 is also available in Stratum 3 versions (see the Ordering Information—Stratum 3 table in the full data sheet). Each device is factory calibrated over temperature to achieve the ±1ppm frequency stability. Standard frequencies for the device include 10, 12.8, 19.44, 20, 38.88, 40, and 51.84MHz. Contact the factory for custom frequencies.
The DS4026 provides excellent phase-noise characteristics. The output is a push-pull CMOS square wave with symmetrical rise and fall times. In addition, the DS4026 is designed to provide a maximum frequency deviation of less than ±4.6ppm over 20 years. The device also provides an I²C interface to allow pushing and pulling of the output frequency by a minimum of ±8ppm (±5ppm for 10MHz) with typical 1ppb resolution.
The DS4026 implements a temperature-to-voltage conversion with a nonlinear relationship. The output from the temperature-to-voltage converter is used to drive the voltage-controlled crystal oscillator to compensate for frequency change.
The device implements an on-chip temperature sensor lookup table, and a digital-to-analog converter (DAC) to adjust the frequency. An I²C interface used to communicate with the DS4026 performs temperature readings and frequency push-pull.
Key Features
Applications/Uses
±1ppm Frequency Accuracy Over -40°C to +85°C
Standard Frequencies: 10, 12.8, 19.44, 20, 38.88, 40, 51.84MHz
Stratum 3 Frequencies: 10, 12.8, 19.2, 20MHz
Maximum ±4.6ppm Deviation Over 20 Years
Minimum ±8ppm (±5ppm for 10MHz) Digital Frequency Tuning Through I²C Interface
Download
E-Mail