The MAX17016 pulse-width-modulation (PWM) controller provides high efficiency, excellent transient response, and high DC-output accuracy needed for stepping down high-voltage batteries to generate low-voltage core or chipset/RAM bias supplies in notebook computers. Combined with low on-resistance MOSFETs (6mΩ, low-side MOSFET and 12mΩ high-side MOSFET), the MAX17016 provides a highly efficient and compact solution for small form factor applications that need a high-power density.
Maxim’s proprietary Quick-PWM™ quick-response, constant-on-time PWM control scheme handles wide input/output voltage ratios (low-duty-cycle applications) with ease and provides 100ns "instant-on" response to
load transients while maintaining a relatively constant switching frequency. The output voltage can be dynamically controlled using the dynamic REFIN, which supports input voltages between 0 to 2V. The REFIN adjustability combined with a resistive voltage-divider on the feedback input allows the MAX17016 to be configured for any output voltage between 0 to 0.9VIN.
The controller senses the current across the 6mΩ synchronous rectifier to achieve a low-cost and highly efficient valley current-limit protection. External current-limit control is still provided to allow higher current-limit settings for applications with heatsinks and air flow, or for lower current applications that need lower current-limit settings to avoid overdesigning the application circuit. The adjustable current limit provides a high degree of flexibility, allowing thermally compensated protection or foldback current-limit protection using a voltage-divider partially derived from the output.
The MAX17016 includes a voltage-controlled soft-start and soft-shutdown in order to limit the input surge current, provide a monotonic power-up (even into a precharged output), and provide a predictable power-up time. The controller also includes output fault protection—undervoltage and overvoltage protection—as well as thermal-fault protection.
The MAX17016 is available in a small 40-pin, 6mm × 6mm, 2W TQFN package.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-2 of 2
MAX17016
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX17016ETL+T
Active
Land Pattern: Not Available
-40°C to +85°C
See data sheet
MAX17016ETL+
Active
TQFN;40 pin;36 mm²
Outline Drawing: 21-0177 (PDF)
Land Pattern: 90-0085 (PDF)
Use pkgcode/variation: T4066M+1*
