The MAX3397E ±15kV ESD-protected bidirectional
level translator provides level shifting for data transfer in
a multivoltage system. Externally applied voltages, VCC
and VL, set the logic levels on either side of the device.
A logic-low signal present on the VL side of the device
appears as a logic-low signal on the VCC side of the
device, and vice versa. The MAX3397E utilizes a transmission-
gate-based design to allow data translation in
either direction (VL ↔ VCC) on any single data line. The MAX3397E accepts VL from +1.2V to +5.5V and VCC from +1.65V to +5.5V, making the device ideal for data
transfer between low-voltage ASICs/PLDs and higher
voltage systems.
The MAX3397E features a shutdown mode that reduces
supply current to less than 1µA, thermal short-circuit protection,
and ±15kV ESD protection on the VCC side for
greater protection in applications that route signals externally.
The MAX3397E operates at a guaranteed data rate
of 8Mbps over the entire specified operating voltage
range. Within specific voltage domains, higher data rates
are possible. See the Timing Characteristics table in the full data sheet.
The MAX3397E is available in an 8-pin µDFN package
and specified over the extended -40°C to +85°C operating
temperature range.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-2 of 2
MAX3397E
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX3397EELA+T
Active
µDFN;8 pin;4.2 mm²
Outline Drawing: 21-0164 (PDF)
Land Pattern: 90-0005 (PDF)
Use pkgcode/variation: L822+1*
Download
E-Mail