The MAX9517/MAX9524 are low-power video amplifiers
with integrated reconstruction filters. Specially suited for
standard-definition video signals, such as composite and
luma, these devices are ideal for a wide range of applications
such as cell phones and security/CCTV cameras.
Video signals should be DC-coupled into the MAX9517
input and AC-coupled into the MAX9524 input.
The MAX9517/MAX9524 have two single-pole, single-throw
(SPST) analog switches that can be used to route
stereo audio, video, or digital signals. The reconstruction
filter typically has ±1dB passband flatness at 9MHz
and 52dB attenuation at 27MHz. The amplifiers have a
gain of 2V/V, and the outputs can be DC-coupled to a
load of 75Ω, which is equivalent to two video loads. The
outputs can be AC-coupled to a load of 150Ω, which is
equivalent to one video load.
The MAX9517/MAX9524 operate from a 2.7V to 3.6V
single supply and are specified over the -40°C to
+125°C automotive temperature range. The MAX9517/MAX9524 are available in a small 12-pin TQFN (3mm x 3mm) package.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4 of 4
MAX9517
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX9517ATC+
Active
TQFN;12 pin;10 mm²
Outline Drawing: 21-0136 (PDF)
Land Pattern: 90-0019 (PDF)
Use pkgcode/variation: T1233+4*
MAX9507 1.8V, DirectDrive Video Filter Amplifier with Load Detection and Dual SPST Analog Switches MAX9586, MAX9587, MAX9588, MAX9589 Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers
More Like This: View Product Families for Similar Products
Download
E-Mail