ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number    



MAX2058
700MHz to 1200MHz High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer

Provides 62dB of Gain Control while Maintaining Full Compliance with GSM/EDGE Spectral Mask Requirements!


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 768kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX2058 high-linearity digital-variable-gain amplifier (DVGA) is designed to provide 62dB of total gain range and typical output IP3 and output P1dB levels of +32.3dBm and +19dBm, respectively. The device is ideal for a variety of applications, including RFID handheld and portal readers, as well as single and multicarrier 700MHz to 1200MHz GSM/EDGE, cdma2000®, WCDMA, and iDEN® base stations. The MAX2058 yields a high level of component integration, which includes two 5-bit, 31dB digital attenuators, a two-stage driver amplifier, a loopback mixer, and a serial interface to control the attenuators.

The MAX2058 is pin compatible with the MAX2059 1800MHz to 2200MHz DVGA, facilitating an easy design-in for applications where a common PC board layout is used for both frequency bands.

The MAX2058 is available in a 40-pin thin QFN package with an exposed paddle. Electrical performance is guaranteed over a -40°C to +85°C temperature range.


EDN China Innovation Award, Winner 2006
Direct-Conversion Transmitter Solution:
MAX2021/MAX2023/MAX2058/MAX2059

Key Features   Applications/Uses
  • +32.3dBm Typical Output IP3
  • +19dBm Typical Output 1dB Compression Point
  • 700MHz to 1200MHz RF Frequency Range
  • 1800MHz to 2200MHz RF Frequency Range (MAX2059)
  • 10.5dB Typical Small-Signal Gain
  • Includes Two Independent 31dB Attenuator Stages, Yielding 62dB of Total Gain-Control Range with 1dB Steps
  • 3-Wire SPI™/MICROWIRE™-Compatible
  • Integrated Loopback Mixer for Tx/Rx Self-Diagnostics
  • +5V Single-Supply Operation
  • External Current-Setting Resistors for Scalable Device Power
  • Lead-Free Package Available

 
  • Automatic Test Equipment
  • Broadband Systems
  • Cellular cdmaOne™, cdma2000, and Integrated Digital Enhanced Network (iDEN) Base-Station Transmitters and Power Amplifiers
  • Digital and Spread-Spectrum Communication Systems
  • GSM 850/GSM 900 2G and 2.5G EDGE Base-Station Transmitters and Power Amplifiers
  • Microwave Terrestrial Links
  • Receiver Gain Control
  • RFID Handheld and Portal Readers
  • Transmitter Gain Control
  • WCDMA 850MHz and Other 3G Base-Station Transmitters and Power Amplifiers

    Key Specifications:  RF and IF Variable Gain Amplifiers
    Part Number Gain
    (dB)
    Freq.
    (MHz)
    Freq.
    (MHz)
    Noise Figure
    (dB)
    Input IP3
    (dBm)
    ISUPPLY
    (mA)
    Footprint
    (mm x mm)
    Package/Pins Price
    min max See Notes
    MAX2058  -51.5 to +10.5 700 1200 6.8 32.3 158 6.0 x 6.0
    TQFN/40
    $7.96 @1k
    See All RF and IF Variable Gain Amplifiers (9)

    Diagram
    MAX2058: RF VGA
    RF VGA

    Design Guides
  • Wireless Infrastructure (PDF)
  • Wireless (PDF)

    Reliability Reports
  • Show FIT data for:
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-6 of 6

    MAX2058 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX2058EVKIT+    
    Active

    Land Pattern: Not Available

    See data sheet
    MAX2058EVKIT    
    Active

    Land Pattern: Not Available

    See data sheet
    MAX2058ETL  
    Active TQFN;40 pin;37 mm²
    Outline Drawing: 21-0141 (PDF)
    Land Pattern: 90-0054 (PDF)
    Use pkgcode/variation: T4066-3*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX2058ETL+  
    Active TQFN;40 pin;37 mm²
    Outline Drawing: 21-0141 (PDF)
    Land Pattern: 90-0054 (PDF)
    Use pkgcode/variation: T4066+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX2058ETL+T    
    Active TQFN;40 pin;37 mm²
    Outline Drawing: 21-0141 (PDF)
    Land Pattern: 90-0054 (PDF)
    Use pkgcode/variation: T4066+3*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX2058ETL-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet

    Notes and Comments
    For Maxim's complete Wireless Infrastructure portfolio, visit www.maxim-ic.com/bts.

    More Information
  • New Product Press Release 2006-08-30 

    Related Products
    MAX2022 High-Dynamic-Range, Direct Upconversion 1500MHz to 2500MHz Quadrature Modulator
    MAX2059 1700MHz to 2200MHz, High-Linearity, SPI-Controlled DVGA with Integrated Loopback Mixer
    MAX2021 High-Dynamic-Range, Direct Up-/Downconversion, 750MHz to 1200MHz Quadrature Modulator/Demodulator
    MAX2027 IF Digitally Controlled Variable-Gain Amplifier
    MAX2055 Digitally Controlled, Variable-Gain, Differential ADC Driver/Amplifier
    MAX2056 800MHz to 1000MHz Variable-Gain Amplifier with Analog Gain Control
    MAX5873 12-Bit, 200Msps, High-Dynamic-Performance, Dual DAC with CMOS Inputs
    MAX2023 High-Dynamic-Range, Direct Up-/Downconversion 1500MHz to 2300MHz Quadrature Mod/Demod
    MAX9491 Factory-Programmable, Single PLL Clock Generator
    MAX2057 1700MHz to 2500MHz Variable-Gain Amplifier with Analog Gain Control
    MAX4389, MAX4390, MAX4392, MAX4393, MAX4394, MAX4395, MAX4396 Ultra-Small, Low-Cost, 85MHz Op Amps with Rail-to-Rail Outputs and Disable

    More Like This: View Product Families for Similar Products

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-0512; Rev 0; 2006-07-07
    This page last modified: 2008-02-19


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products