The MAX19710 is an ultra-low-power, highly integrated mixed-signal analog front-end (AFE) ideal for wideband communication applications operating in full-duplex (FD) mode. Optimized for high dynamic performance and ultra-low power, the device integrates a dual 10-bit,
7.5Msps receive (Rx) ADC; dual 10-bit, 7.5Msps transmit (Tx) DAC; three fast-settling 12-bit aux-DAC channels for ancillary RF front-end control; and a 10-bit, 333ksps housekeeping aux-ADC. The typical operating power in FD mode is 30mW at a 7.5MHz clock frequency.
The Rx ADCs feature 54.8dB SINAD and 79.8dBc SFDR at 3.3MHz input frequency with a 7.5MHz clock frequency. The analog I/Q input amplifiers are fully differential and accept 1.024VP-P full-scale signals. Typical I/Q channel matching is ±0.01° phase and ±0.01dB gain.
The Tx DACs feature 73.8dBc SFDR at fOUT = 620kHz
and fCLK = 7.5MHz. The analog I-Q full-scale output voltage
range is ±400mV differential. The output DC common-
mode voltage is from 0.89V to 1.36V. The I/Q channel
offset is adjustable to optimize radio lineup sideband/
carrier suppression. Typical I-Q channel matching is
±0.01dB gain and ±0.15° phase.
Two independent 10-bit parallel, high-speed digital
buses used by the Rx ADC and Tx DAC allow full-duplex
operation for frequency-division duplex applications.
The Rx ADC and Tx DAC can be disabled
independently to optimize power management. A 3-wire
serial interface controls power-management modes, the
aux-DAC channels, and the aux-ADC channels.
The MAX19710 operates on a single 2.7V to 3.3V
analog supply and 1.8V to 3.3V digital I/O supply.
The MAX19710 is specified for the extended (-40°C to
+85°C) temperature range and is available in a 56-pin,
thin QFN package. The Selector Guide at the end of the
data sheet lists other pin-compatible versions in this AFE
family. For time-division duplex (TDD) applications, refer
to the MAX19705–MAX19708 AFE family of products.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4 of 4
MAX19710
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX19710ETN
Active
TQFN;56 pin;49 mm²
Outline Drawing: 21-0144 (PDF)
Land Pattern: 90-0043 (PDF)
Use pkgcode/variation: T5677-2*
Download
E-Mail