The DS26521DK is an easy-to-use evaluation kit for
the DS26521 T1/E1/J1 single-chip transceiver (SCT).
The DS26521DK is intended to be used as a stand-alone
system. The board comes complete with a
transceiver, transformer, termination resistors,
configuration switches, network connectors,
microprocessor, and RS-232 connector. The on-board
processor and Dallas' ChipView software give
point-and-click access to configuration and status
registers from a Windows®-based PC. On-board
LEDs indicate receive loss-of-signal and interrupt
status, as well as multiple clock and signal routing
configurations.
Key Features
Applications/Uses
Demonstrates Key Functions of DS26521
T1/E1/J1 SCT
Includes Transceiver, Transformers, and
Termination Passives
BNC Connections for 75 E1
RJ48 Connector for 120 E1 and 100 T1
On-Board Processor and ChipView Software
Provide Point-and-Click Access to the
DS26521 Register Set
Accessible Address/Data Bus with Tri-State
Control to Allow Interface for External
Processor
All Equipment-Side Framer Pins are Easily
Accessible for External Data Source/Sink
LEDs for Loss-of-Signal and Interrupt Status
Easy-to-Read Silkscreen Labels Identify the
Signals Associated with All Connectors,
Jumpers, and LEDs
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1 of 1
DS26521DK
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
DS26521DK
Active
LQFP;64 pin;149 mm²
Outline Drawing: 21-0083 (PDF)
Land Pattern: 90-0141 (PDF)
Use pkgcode/variation: C64-8*
Download
E-Mail
E1
