ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number



MAX9450, MAX9451, MAX9452
High-Precision Clock Generators with Integrated VCXO

First SONET Clock Generator with Integrated VCXO and Holdover for Replacing Expensive VCXOs and External Fail-Safe Logic


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 316kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX9450/MAX9451/MAX9452 clock generators provide high-precision clocks for timing in SONET/SDH systems or Gigabit Ethernet systems. The MAX9450/MAX9451/MAX9452 can also provide clocks for the high-speed and high-resolution ADCs and DACs in 3G base stations. Additionally, the devices can also be used as a jitter attenuator for generating high-precision CLK signals.

The MAX9450/MAX9451/MAX9452 feature an integrated VCXO. This configuration eliminates the use of an external VCXO and provides a cost-effective solution for generating high-precision clocks. The MAX9450/MAX9451/MAX9452 feature two differential inputs and clock outputs. The inputs accept LVPECL, LVDS, differential signals, and LVCMOS. The input reference clocks range from 8kHz to 500MHz.

The MAX9450/MAX9451/MAX9452 offer LVPECL, HSTL, and LVDS outputs, respectively. The output range is up to 160MHz, depending on the selection of crystal. The input and output frequency selection is implemented through the I²C or SPI™ interface. The MAX9450/MAX9451/MAX9452 feature clock output jitter less than 0.8ps RMS (in a 12kHz to 20MHz band) and phase-noise attenuation greater than -130dBc/Hz at 100kHz. The phase-locked loop (PLL) filter can be set externally, and the filter bandwidth can vary from 1Hz to 20kHz.

The MAX9450/MAX9451/MAX9452 feature an input clock monitor with a hitless switch. When a failure is detected at the selected reference clock, the device can switch to the other reference clock. The reaction to the recovery of the failed reference clock can be revertive or nonrevertive. If both reference clocks fail, the PLL retains its nominal frequency within a range of ±20ppm at +25°C.

The MAX9450/MAX9451/MAX9452 operate from 2.4V to 3.6V supply and are available in 32-pin TQFP packages with exposed pads.

An evaluation kit is available:  MAX9450EVKIT  

Key Features   Applications/Uses
  • Integrated VCXO Provides a Cost-Effective Solution for High-Precision Clocks
  • 8kHz to 500MHz Input Frequency Range
  • 15MHz to 160MHz Output Frequency Range
  • I²C or SPI Programming for the Input and Output Frequency Selection
  • PLL Lock Range > ±60ppm
  • Two Differential Outputs with Three Types of Signaling: LVPECL, LVDS, or HSTL
  • Input Clock Monitor with Hitless Switch
  • Internal Holdover Function within ±20ppm of the Nominal Frequency
  • Low Output CLK Jitter: < 0.8ps RMS in the 12kHz to 20MHz Band
  • Low Phase Noise > -130dBc at 100kHz, > -140dBc at 1MHz
 
  • 10-Gigabit Network Routers and Switches
  • 3G Cellular Phone Base Stations
  • General Jitter Attenuation
  • SONET/SDH Systems

Diagram
MAX9450, MAX9451, MAX9452: Functional Diagram
Functional Diagram

Application Notes
  • Application Note 3920: Component Selection and Performance Test for the MAX945x High-Precision CLK Generators - MAX9450, MAX9451, MAX9452
  • Evaluation Kits
  • MAX9450EVKIT
  • Reliability Reports
  • Reliability Report: MAX9450.pdf MAX9451.pdf
  • Show FIT data for:
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-13 of 13

    MAX9450 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX9450EHJ+  
    Active TQFP-EP;32 pin;51.8 mm²
    Outline Drawing: 21-0079 (PDF)
    Land Pattern: 90-0326 (PDF)
    Use pkgcode/variation: H32E+6*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX9450EHJ+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX9450EHJ  
    Active TQFP-EP;32 pin;51.8 mm²
    Outline Drawing: 21-0079 (PDF)
    Land Pattern: 90-0326 (PDF)
    Use pkgcode/variation: H32E-6*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX9450EHJ-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX9451 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX9451EVKIT+    
    Active

    Land Pattern: Not Available

    See data sheet
    MAX9451EHJ  
    Active TQFP-EP;32 pin;51.8 mm²
    Outline Drawing: 21-0079 (PDF)
    Land Pattern: 90-0326 (PDF)
    Use pkgcode/variation: H32E-6*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX9451EHJ-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX9451EHJ+  
    Active TQFP-EP;32 pin;51.8 mm²
    Outline Drawing: 21-0079 (PDF)
    Land Pattern: 90-0326 (PDF)
    Use pkgcode/variation: H32E+6*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX9451EHJ+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX9452 Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX9452EHJ  
    Active TQFP-EP;32 pin;51.8 mm²
    Outline Drawing: 21-0079 (PDF)
    Land Pattern: 90-0326 (PDF)
    Use pkgcode/variation: H32E-6*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX9452EHJ-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX9452EHJ+  
    Active TQFP-EP;32 pin;51.8 mm²
    Outline Drawing: 21-0079 (PDF)
    Land Pattern: 90-0326 (PDF)
    Use pkgcode/variation: H32E+6*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX9452EHJ+T    
    Active TQFP-EP;32 pin;51.8 mm²
    Outline Drawing: 21-0079 (PDF)
    Land Pattern: 90-0326 (PDF)
    Use pkgcode/variation: H32E+6*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis

    More Information
  • New Product Press Release 2006-08-17 

    Related Products

    More Like This: View Product Families for Similar Products

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-0547; Rev 3; 2007-12-04
    This page last modified: 2007-12-04


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2010 by Maxim Integrated Products