VRD11/VRD10, K8 Rev F 2/3/4-Phase PWM Controllers with Integrated Dual MOSFET Drivers
Peak Current-Mode Control Combined with Maxim's Proprietary Rapid Active Current Averaging (RA²) for Excellent Current-Sharing Accuracy, Fast, Accurate Voltage Positioning, and Superior Transient Response
The MAX8809A/MAX8810A synchronous, 2-/3-/4-phase, step-down, current-mode controllers with integrated
dual-phase MOSFET drivers provide flexible
solutions that fully comply with Intel® VRD11/VRD10
and AMD K8 Rev F CPU core supplies. The flexible
design supplies load currents up to 150A for low-voltage
CPU core power requirements.
A tri-state SEL input is available to configure the VID
logic for either the Intel VRD11/VRD10 or AMD K8 Rev F
applications. An enable input (EN) is available to disable
the IC. True-differential remote output-voltage
sensing enables precise regulation at the load by eliminating
the effects of trace impedance in the output and
return paths. A high-accuracy DAC combined with precision
current-sense amplifiers and droop control
enable the MAX8809A/MAX8810A to meet the most
stringent tolerance requirements of new-generation
high-current CPUs. These ICs use either integral or voltage-positioning feedback control to achieve high output-voltage accuracy.
The COMP input allows for either positive or negative
voltage offsets from the VID code voltage. A power-good
signal (VRREADY) is provided for startup
sequencing and fault annunciation. The SS/OVP pin
enables the programming of the soft-start period, and
provides an indication of an overvoltage condition. A
soft-stop feature prevents negative voltage spikes on
the output at turn-off, eliminating the need for an external
Schottky clamp diode.
The MAX8809A/MAX8810A incorporate a proprietary
"rapid active average" current-mode control scheme for
fast and accurate transient-response performance, as
well as precise load current sharing. Either the inductor
DCR or a resistive current-sensing element is used for
current sensing. When used with DCR sensing, rapid
active current averaging (RA²) eliminates the tolerance
effects of the inductance and associated current-sensing
components, providing superior phase current
matching, accurate current limit, and precise load-line.
The MAX8809A operates as a single-chip, 2-phase
solution with integrated drivers. It also provides a 3rd-phase
PWM output and easily supports 3-phase design
by adding the MAX8552 high-performance driver. The
MAX8810A enables up to 4-phase designs by adding
the MAX8523 high-performance dual driver for a compact
2-chip solution.
Key Features
Applications/Uses
VRD11/VRD10 and K8 Rev F Compliant
±0.35% Initial Output Voltage Accuracy
Dual Integrated Drivers with Integrated Bootstrap Diodes
Up to 26V Input Voltage
Adaptive Shoot-Through Protection
Soft-Start, Soft-Stop, VRREADY Output
Fast Load Transient Response
Individual Phase, Fully Temperature-Compensated Cycle-by-Cycle Average Current Limit
Current Foldback at Short Circuit
Voltage Positioning or Integral Feedback
Differential Remote Voltage Sensing
Programmable Positive and Negative Offset Voltages
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4 of 4
MAX8809A
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX8809AETL+
Active
TQFN;40 pin;26 mm²
Outline Drawing: 21-0140 (PDF)
Land Pattern: 90-0016 (PDF)
Use pkgcode/variation: T4055+1*
MAX8523 High-Speed, Dual-Phase Gate Driver for Multiphase, Step-Down Converters MAX8552 High-Speed, Wide-Input, Single-Phase MOSFET Driver MAX8524, MAX8525 2- to 8-Phase VRM 10/9.1 PWM Controllers with Precise Current Sharing and Fast Voltage Positioning MAX1937, MAX1938, MAX1939 Two-Phase Desktop CPU Core Supply Controllers with Controlled VID Change
Download
E-Mail