ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number    



MAX13101E, MAX13102E, MAX13103E, MAX13108E
16-Channel Buffered CMOS Logic-Level Translators


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 184kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX13101E/MAX13102E/MAX13103E/MAX13108E 16-bit bidirectional CMOS logic-level translators provide the level shifting necessary to allow data transfer in multivoltage systems. These devices are inherently bidirectional due to their design and do not require the use of a direction input. Externally applied voltages, VCC and VL, set the logic levels on either side of the devices. Logic signals present on the VL side of the device appear as a higher voltage logic signal on the VCC side of the device, and vice-versa.

The MAX13101E/MAX13102E/MAX13103E feature an enable input (EN) that, when low, reduces the VCC and VL supply currents to less than 2µA. The MAX13108E features a multiplexing input (MULT) that selects one byte between the two, thus allowing multiplexing of the signals. The MAX13101E/MAX13102E/MAX13103E/MAX13108E have ±15kV ESD protection on the I/O VCC side for greater protection in applications that route signals externally. Three different output configurations are available during shutdown, allowing the I/O on the VCC side or the VL side to be put in a high-impedance state or pulled to ground through an internal 6kΩ resistor.

The MAX13101E/MAX13102E/MAX13103E/MAX13108E accept VCC voltages from +1.65V to +5.5V and VL voltages from +1.2V to VCC, making them ideal for data transfer between low-voltage ASICs/PLDs and higher voltage systems. The MAX13101E/MAX13102E/MAX13103E/MAX13108E are available in 36-bump WLP and 40-pin TQFN packages, and operate over the extended -40°C to +85°C temperature range.

Key Features   Applications/Uses
  • Wide Supply Voltage Range
    • VCC Range of 1.65V to 5.5V
    • VL Range of 1.2V to VCC
  • ESD Protection on I/O VCC Lines
    • ±15kV Human Body Model
  • Up to 20Mbps Throughput
  • Low 0.03µA Typical Quiescent Current
  • WLP and TQFN Packages

 
  • Cell Phones
  • CMOS Logic-Level Translation
  • Digital Still Cameras
  • PDAs
  • Portable Equipment
  • Smartphones

    Key Specifications:  Logic Level Translators
    Part Number Level Transl. VL
    (V)
    VCC
    (V)
    Data Rate
    (Mbps)
    Features I/O VCC State I/O VL State ICC
    (µA)
    VL
    (µA)
    ICC (Shutdn.)
    (µA)
    IL (Shutdn.)
    (µA)
    Price
    max Shutdn. Shutdn. max max max max See Notes
    MAX13101E  16 1.2 to 5.5 1.65 to 5.5 20
    Bidirectional
    CMOS/ Push-Pull Drive
    6kΩ to GND High Impedance 10 20 0.03 0.03 $2.50 @1k
    MAX13102E  16 High Impedance 6kΩ to GND $2.50 @1k
    MAX13103E  16 High Impedance High Impedance $2.50 @1k
    MAX13108E  8:1 High Impedance High Impedance $2.50 @1k
    See All Logic Level Translators (51)

    Diagram
    MAX13101E, MAX13102E, MAX13103E, MAX13108E: Typical Operating Circuit
    Typical Operating Circuit

    Reliability Reports
  • Show FIT data for:
  • Request Reliability Report for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-14 of 14

    MAX13101E Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX13101EETL+  
    Active TQFN;40 pin;26 mm²
    Outline Drawing: 21-0140 (PDF)
    Land Pattern: 90-0016 (PDF)
    Use pkgcode/variation: T4055+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX13101EETL+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX13101EETL    
    Active TQFN;40 pin;26 mm²
    Outline Drawing: 21-0140 (PDF)
    Land Pattern: 90-0016 (PDF)
    Use pkgcode/variation: T4055-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX13101EETL-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX13102E Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX13102EETL+  
    Active TQFN;40 pin;26 mm²
    Outline Drawing: 21-0140 (PDF)
    Land Pattern: 90-0016 (PDF)
    Use pkgcode/variation: T4055+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX13102EETL+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX13103E Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX13103EETL+  
    Active TQFN;40 pin;26 mm²
    Outline Drawing: 21-0140 (PDF)
    Land Pattern: 90-0016 (PDF)
    Use pkgcode/variation: T4055+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX13103EETL+T    
    Active TQFN;40 pin;26 mm²
    Outline Drawing: 21-0140 (PDF)
    Land Pattern: 90-0016 (PDF)
    Use pkgcode/variation: T4055+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX13103EETL  
    Active TQFN;40 pin;26 mm²
    Outline Drawing: 21-0140 (PDF)
    Land Pattern: 90-0016 (PDF)
    Use pkgcode/variation: T4055-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX13103EETL-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX13108E Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX13108EETL+  
    Active TQFN;40 pin;26 mm²
    Outline Drawing: 21-0140 (PDF)
    Land Pattern: 90-0016 (PDF)
    Use pkgcode/variation: T4055+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX13108EETL+T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet
    MAX13108EETL    
    Active TQFN;40 pin;26 mm²
    Outline Drawing: 21-0140 (PDF)
    Land Pattern: 90-0016 (PDF)
    Use pkgcode/variation: T4055-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    MAX13108EETL-T    
    Active

    Land Pattern: Not Available

    -40°C to +85°C See data sheet

    More Information
  • New Product Press Release 2006-05-02 

    Related Products

    More Like This: View Product Families for Similar Products

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-3802; Rev 3; 2008-11-10
    This page last modified: 2008-11-10


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products