The MAX1392/MAX1395 micropower, serial-output,
10-bit, analog-to-digital converters (ADCs) operate with
a single power supply from +1.5V to +3.6V. These
ADCs feature automatic shutdown, fast wake-up, and a
high-speed 3-wire interface. Power consumption is only
0.740mW (VDD = +1.5V) at the maximum conversion
rate of 357ksps. AutoShutdown™ between conversions
reduces power consumption at slower throughput rates.
The MAX1392/MAX1395 require an external reference
VREF that has a wide range from 0.6V to VDD. The
MAX1392 provides one true-differential analog input
that accepts signals ranging from 0 to VREF (unipolar
mode) or ±VREF/2 (bipolar mode). The MAX1395 provides
two single-ended inputs that accept signals ranging
from 0 to VREF. Analog conversion results are
available through a 5MHz, 3-wire SPI™-/QSPI™-/MICROWIRE™-/digital signal processor (DSP)-compatible
serial interface. Excellent dynamic performance,
low voltage, low power, ease of use, and small package
sizes make these converters ideal for portable battery-powered data-acquisition applications, and for
other applications that demand low power consumption
and minimal space.
The MAX1392/MAX1395 are available in a space-saving
(3mm x 3mm) 10-pin TDFN package. The parts
operate over the extended (-40°C to +85°C) and military
(-55°C to +125°C) temperature ranges.
Download
E-Mail