The MAX5077 is a +4.5V to +15V push-pull, current-fed
topology driver subsystem with an integrated oscillator
used in telecom module power supplies. The device
drives two MOSFETs connected to a center-tapped
transformer primary providing secondary-side, isolated,
negative or positive voltages. The MAX5077 features a
programmable accurate integrated oscillator with a
synchronizing clock output to synchronize an external
PWM regulator. A single external resistor programs the
internal oscillator frequency from 50kHz to 1.5MHz.
The MAX5077 incorporates dual MOSFET drivers with
±3A peak drive currents and 50% duty cycle. The
MOSFET drivers generate complementary signals to
drive external ground-referenced n-channel MOSFETs.
The MAX5077 clock output frequency is programmable
by logic inputs to set the clock output to 1x, 2x, or 4x
the MOSFET's driver frequency.
The MAX5077 is available in a 14-pin exposed pad
TSSOP package and is specified over the -40°C to
+125°C operating temperature range.
Key Features
Applications/Uses
Dedicated Current-Fed, Push-Pull Driver Subsystem
Oscillator Frequency Programmable from 50kHz to 1.5MHz
Single +4.5V to +15V Supply Voltage Range
±3A Peak Gate-Drive Current
1mA Operating Current at 250kHz with No Capacitive Load
Selectable Synchronizing Clock Frequency for a Preceding PWM Stage
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
Download
E-Mail
