|
The MAX13000EMAX13005E 6-channel level translators
provide the level shifting necessary to allow data
transfer in multivoltage systems. Externally applied voltages,
VCC and VL, set the logic levels on either side of the device. Logic signals present on the VL side of the
device appear as higher voltage logic signals on the
VCC side of the device, and vice-versa.
The MAX13000EMAX13005E feature a low VCC and VL quiescent supply current less than 4µA. The
MAX13000EMAX13005E also have ±15kV ESD protection
on the I/O VCC side for greater protection in applications
that route signals externally. The ESD protection is
specified using the Human Body Model (HBM). The
MAX13000E/MAX13001E/MAX13002E operate at a guaranteed
230kbps data rate. The MAX13003E/
MAX13004E/MAX13005E operate at a guaranteed
20Mbps data rate when VCC > +1.65V.
The MAX13000E/MAX13003E are bidirectional level
translators, allowing data translation in either direction
(VL <> VCC) on any single data line without a DIRECTION input. The MAX13001E/MAX13002E/MAX13004E/
MAX13005E unidirectional level translators level shift
data in one direction (VL > VCC or VCC > VL) on any
single data line. The MAX13001E/MAX13002E/
MAX13004E/MAX13005E unidirectional translators'
inputs have the capability to interface with both CMOS
and open-drain (OD) outputs. For more information see
the Ordering Information, Selector Guide, and the Input-
Driver Requirements sections.
The MAX13000EMAX13005E operate with +0.9V to
+3.6V VL voltages and +1.5V to +3.6V VCC voltages. The
MAX13000EMAX13005E are available in 16-bump
UCSP and 16-pin TSSOP packages, and are specified
over the extended -40°C to +85°C operating temperature
range.
|