The MAX9502 small, low-power video amplifier with
integrated reconstruction filter operates from a supply
voltage as low as 2.5V. The small size and the low minimum
supply voltage make the MAX9502 ideal for
portable applications or small, low-power applications.
The MAX9502 DC-couples the input and the output,
resulting in a very small solution. The MAX9502 input can
be directly connected to the output of a video digital-to-analog
converter (DAC). The reconstruction filter is implemented
as a 4th-order Chebyshev with a minimum
passband of 5.5MHz, 3dB attenuation at 8MHz, and
55dB attenuation at 27MHz.
The output amplifier provides a closed-loop gain of
+6dB (MAX9502G) or +12dB (MAX9502M), and can
drive a 2VP-P video signal into a 150 load to ground. The output signal is level-shifted so the sync tip is
110mV (typ) above ground.
The MAX9502 operates from a 2.5V to 3.6V single supply
and consumes only 5.3mA quiescent supply current.
An active-low shutdown mode reduces the supply
current to 0.01µA.
The MAX9502 is available in tiny 6-pin µDFN (1mm x 1.5mm x 0.8mm) and 5-pin SC70 packages. The device is specified over the -40°C to +85°C extended and -40°C to +125°C automotive temperature ranges.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-14 of 14
MAX9502
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX9502GAALT+
Active
µDFN;6 pin;2 mm²
Outline Drawing: 21-0147 (PDF)
Land Pattern: 90-0080 (PDF)
Use pkgcode/variation: L611+1*
MAX9503 DirectDrive® Video Amplifier with Reconstruction Filter MAX4090 3V/5V, 6dB Video Buffer with Sync-Tip Clamp and 150nA Shutdown Current MAX4032 5V, 6dB Video Buffer with Sync-Tip Clamp, Output Sag Correction, and 150nA Shutdown Current MAX9505 DirectDrive Video Amplifier with Reconstruction Filter and Analog Switch MAX4412, MAX4413 Low-Cost, Low-Power, Ultra-Small, 3V/5V, 500MHz Single-Supply Op Amps with Rail-to-Rail Outputs
More Like This: View Product Families for Similar Products
Download
E-Mail
load to ground. The output signal is level-shifted so the sync tip is
110mV (typ) above ground.