The MAX8620Y evaluation kit (EV kit) is a fully assembled
and tested printed-circuit board (PCB) that evaluates
the MAX8620Y power-management IC. The MAX8620Y IC features a 500mA adjustable step-down DC-DC converter, two 300mA low-dropout linear regulators
(LDOs), and a reset function.
The MAX8620Y EV kit is configured to operate over a
2.7V to 5.5V input range. The MAX8620Y EV kit stepdown
converter's output voltage is configured for 1.8V
at 500mA, and the two LDOs can be configured
through jumpers to nine different output voltages in the
1.8V to 3.3V range. This makes the MAX8620Y suitable
for DSP or microprocessor (µP) power-management
applications in handsets, PDAs, smartphones, and
other portable applications.
Key Features
Applications/Uses
1.8V, 500mA, 2.5MHz Step-Down DC-DC Converter
Up to 92% High-Efficiency Step-Down Converter
Internal Synchronous Rectifier
Two Low-Noise, 300mA LDOs with Jumper-Selectable Output Voltages
30ms (min) Active-Low RESET Output Signal
Demonstrates Hands-Free Enabling
Power Sequencing and On/Off Control Logic
Overcurrent and Thermal Protection
Tiny 3mm x 3mm, 14-Pin TDFN Package with Exposed Pad
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1 of 1
MAX8620YEVKIT
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX8620YEVKIT
Active
Land Pattern: Not Available
See data sheet
Related Products
MAX8620Y µPMIC for Microprocessors or DSPs in Portable Equipment
Download
E-Mail