The MAX5893 programmable interpolating, modulating,
500Msps, dual digital-to-analog converter (DAC) offers
superior dynamic performance and is optimized for high-performance
wideband, single-carrier transmit applications.
The device integrates a selectable 2x/4x/8x
interpolating filter, a digital quadrature modulator, and
dual 12-bit high-speed DACs on a single integrated circuit.
At 30MHz output frequency and 500Msps update
rate, the in-band SFDR is 84dBc while consuming 1.1W.
The device also delivers 72dB ACLR for single-carrier
WCDMA at a 61.44MHz output frequency.
The selectable interpolating filters allow lower input data
rates while taking advantage of the high DAC update
rates. These linear-phase interpolation filters ease
reconstruction filter requirements and enhance the
passband dynamic performance. Individual offset and
gain programmability allow the user to calibrate out local
oscillator (LO) feedthrough and sideband suppression
errors generated by analog quadrature modulators.
The MAX5893 features a fIM/4 digital image-reject
modulator. This modulator generates a quadrature-modulated
IF signal that can be presented to an analog I/Q
modulator to complete the upconversion process. A
second digital modulation mode allows the signal to be
frequency-translated with image pairs at fIM/2 or fIM/4.
The MAX5893 features a standard 1.8V CMOS, 3.3V tolerant
data input bus for easy interface. A 3.3V SPI™ port
is provided for mode configuration. The programmable
modes include the selection of 2x/4x/8x interpolating filters,
fIM/2, fIM/4 or no digital quadrature modulation
with image rejection, channel gain and offset adjustment,
and offset binary or two's complement data interface.
Pin-compatible 14- and 16-bit devices are also available.
Refer to the MAX5894 data sheet for the 14-bit version
and the MAX5895 data sheet for the 16-bit version.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4 of 4
MAX5893
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX5893EGK-D
Active
Land Pattern: Not Available
-40°C to +85°C
See data sheet
MAX5893EGK-TD
Active
Land Pattern: Not Available
-40°C to +85°C
See data sheet
MAX5893EGK+D
Active
QFN;68 pin;100 mm²
Outline Drawing: 21-0122 (PDF)
Land Pattern: 90-0245 (PDF)
Use pkgcode/variation: G6800+4*
Download
E-Mail