ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number    



DS80C410, DS80C411
Network Microcontrollers with Ethernet and CAN


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Data Sheet
FULL DATA SHEET (PDF, 1.8MB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Errata
  • Errata DS80C410 80C410A1.pdf 
  • Errata DS80C411 80C411A2.pdf 
  • Description
    The DS80C410/DS80C411 network microcontrollers offer the highest integration available in an 8051 device. Peripherals include a 10/100 Ethernet MAC, three serial ports, an optional CAN 2.0B controller, 1-Wire® Master, and 64 I/O pins. The DS80C410 and DS80C411 also include 64KB internal SRAM for user application storage and network stack.

    To enable access to the network, a full application accessible TCP IPv4/6 network stack and OS are provided in the ROM. The network stack supports up to 32 simultaneous TCP connections and can transfer up to 5Mbps through the Ethernet MAC. Its maximum system clock frequency of 75MHz results in a minimum instruction cycle time of 54ns. Access to large program or data memory areas is simplified with a 24-bit addressing scheme that supports up to 16MB of contiguous memory.

    To accelerate data transfers between the microcontroller and memory, the DS80C410 and DS80C411 provide four data pointers, each of which can be configured to automatically increment or decrement upon execution of certain data pointer-related instructions. High-speed shift, normalization, accumulate functions and 32-bit/16-bit multiply and divide operations are optimized by the DS80C410/DS80C411 hardware math accelerator.

    The High-Speed Microcontroller User's Guide and the High-Speed Microcontroller User's Guide: Network Microcontroller Supplement should be used in conjunction with this data sheet. Download both at: www.maxim-ic.com/user_guides.
     
    Comparison Table
    Part Number
    and
    Description
    Internal Program Memory Internal MOVX SRAM Serial Ports 16-bit Timers Data Pointers 10/100 Ethernet MAC 1-Wire Master Watchdog Power Fail Reset & Interrupt Power Mgmt. Mode Supply Voltage (V) Package
    DS80C400
    Network Microcontroller
    64kB ROM 1kB 3 4 4 Yes Yes Yes Yes Yes 1.8
    3.3
    100/LQFP
    DS80C410
    Network Microcontrollers with Ethernet and CAN
    64kB ROM 73.5kB 3 4 4 Yes Yes Yes Yes Yes 1.8
    3.3
    100/LQFP
    DS80C411
    Network Microcontrollers with Ethernet MAC
    64kB ROM 73.5kB 3 4 4 Yes Yes Yes Yes Yes 1.8
    3.3
    100/LQFP

    Key Features   Applications/Uses
    • High-Performance Architecture
      • Single 8051 Instruction Cycle in 54ns
      • DC to 75MHz Clock Rate
      • Flat 16MB Address Space
      • Four Data Pointers with Auto-Increment/Decrement and Select-Accelerate Data Movement
      • 16/32-Bit Math Accelerator
    • Multitiered Networking and I/O
      • 10/100 Ethernet Media Access Controller (MAC)
      • Optional CAN 2.0B Controller
      • 1-Wire Net Controller
      • Three Full-Duplex Hardware Serial Ports
      • Up to Eight Bidirectional 8-Bit Ports (64 Digital I/O Pins)
    • Robust ROM Firmware
      • Supports Network Boot Over Ethernet Using DHCP and TFTP
      • Full, Application-Accessible TCP/IP Network Stack
      • Supports IPv4 and IPv6
      • Implements UDP, TCP, DHCP, ICMP, and IGMP
      • Preemptive, Priority-Based Task Scheduler
      • MAC Address Can Optionally Be Acquired from IEEE-Registered DS2502-E48
    • 10/100 Ethernet Mac
      • Flexible IEEE 802.3 MII (10/100Mbps) and ENDEC (10Mbps) Interfaces Allow Selection of PHY
      • Low-Power Operation: Ultra-Low-Power Sleep Mode with Magic Packet® and Wake-Up Frame Detection
      • 8kB On-Chip Tx/Rx Packet Data Memory with Buffer Control Unit Reduces Load on CPU
      • Half- or Full-Duplex Operation with Flow Control
      • Multicast/Broadcast Address Filtering with VLAN Support

    Features continued on page 34 of the full data sheet.

     
  • Data Converters (Serial-to-Ethernet, CAN-to-Ethernet)
  • Environmental Monitoring
  • Home/Office Automation
  • Industrial Control and Automation
  • Network Sensors
  • Remote Data-Collection
  • Transaction/Payment Terminals
  • Vending

    Key Specifications:   Networked Microcontrollers
    Part Number Internal Program Memory Internal MOVX SRAM Serial Ports 16-bit Timers Data Pointers 10/100 Ethernet MAC 1-Wire CAN 2.0B Controller Watchdog Power Fail Reset & Interrupt Power Mgmt. Mode Ring Osc. Features EV-Kit Package Price**
    DS80C410  64kB ROM 64kB 3 4 4 Yes Master Yes Yes Yes Yes No
    16/32-bit Math Coprocessor
    256-Byte Internal Scratchpad
    Data Pointer Decrement
    Low Cost, High Speed
    Multiple External Interrupts
    Six External Interrupts
    No LQFP/100 $8.93 @ 1k
    DS80C411  No $8.00 @ 1k
    See All Networked Microcontrollers (9)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    Application Notes
  • Application Note 2935: Design Considerations for CAN Bus and Asynchronous Serial - ds80c410, ds80c411
  • Application Note 3398: DS80C400/DS80C410/DS80C411 Network Boot - DS80C410, DS80C411
  • Application Note 3421: Interfacing 8051-based Microcontrollers to an SCI Port - DS80C410
  • Application Note 3478: DS80C400/410/411 Flash Memory Selection - DS80C410, DS80C411
  • Application Note 3550: Using the IAR Compiler for the DS80C400 - DS80C410, DS80C411
  • Application Note 3553: CAN-to-Ethernet Using the DS80C400 - DS80C410
  • Application Note 3664: Expanding TINI's IO Capability - ds80c410, ds80c411
  • Application Note 3804: Frequently Asked Questions (FAQs) about Networked Microcontrollers - DS80C410, DS80C411
  • Application Note 4015: Secure User Authentication with Network Microcontrollers - DS80C410, DS80C411
  • Application Note 4206: Choosing the Right 1-Wire® Master for Embedded Applications - DS80C410, DS80C411

    Evaluation Kits
    none

    Reliability Reports
  • Reliability Report: DS80C410.pdf DS80C411.pdf

    Software/Models
  • Supplement Guide

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-4 of 4

    DS80C410 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS80C410-FNY+  
    LQFP;100 pin;262 mm²
    Outline Drawing: 21-0297 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: C100L+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS80C410-FNY    
    LQFP;100 pin;262 mm²
    Outline Drawing: 21-0297 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: C100L-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis
    DS80C411 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS80C411-FNY+  
    LQFP;100 pin;262 mm²
    Outline Drawing: 21-0297 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: C100L+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS80C411-FNY    
    LQFP;100 pin;262 mm²
    Outline Drawing: 21-0297 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: C100L-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis

    More Information
  • High-Speed Microcontroller User's Guide (PDF)
  • High-Speed Microcontroller User's Guide: Network Microcontroller Supplement (PDF)
  • Product Ad: Download

    Related Products
    DS80C400 Network Microcontroller

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Errata 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-4659; 2009-06-16
    This page last modified: 2009-06-16


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products