The MAX6974/MAX6975 precision current-sinking,
24-output PWM LED drivers drive red, green, and blue
LEDs for full-color graphic message boards and video
displays. Each output has an individual 12-bit (MAX6974)
or 14-bit (MAX6975) PWM-intensity (hue) control and
7-bit (MAX6974) or 5-bit (MAX6975) global PWM intensity
(luminance) control. The MAX6974/MAX6975 feature a
high-speed, fully buffered cascadable serial interface,
open-circuit LED fault detection circuitry, as well as a
watchdog timer.
The driver has three banks of eight outputs, with each
bank intended to drive a different color in RGB applications.
The full-scale current for each bank of eight outputs
is adjustable from 6mA to 30mA in 256 steps
(0.3125% per step) to calibrate each color.
The MAX6974/MAX6975 can optionally multiplex by
using outputs active-low MUX0 and active-low MUX1, which each drive an
external pnp transistor. Multiplexing doubles the
MAX6974/MAX6975 drive capability to 48 LEDs.
The MAX6974/MAX6975 operate from a 3.0V to 3.6V
power supply. The LED power supply can range from
3V to 7V. The LED drivers require only 0.8V headroom
above the LEDs' forward-voltage drop. Using a separate
LED supply voltage for each LED minimizes power
consumption.
The serial interface uses differential signaling for the
high-speed clock and data signals to reduce EMI and
improve signal integrity. The MAX6974/MAX6975 buffer
all interface signals to simplify cascading devices in
modules that use a large number of drivers.
An internal watchdog timer, when enabled, automatically
clears the pixel-data registers and blanks the display if
any of the signal inputs fail to toggle within 40ms.
The MAX6974/MAX6975 are available in 40-pin TQFN
packages and operate over the -40°C to +125°C
temperature range.
Refer to the MAX6972/MAX6973 data sheet for a
16-output, 11mA to 55mA software-compatible device.
|
Download
E-Mail