QuickView

Technical Documents

Ordering Info

More Information

User Comments (0)

All

Status
Part Number	Status
DS28E04-100	Active: In Production. But some versions of the family are No Longer Available. See Ordering Information.

Description

FULL DATA SHEET (PDF, 352kB) Download   E-Mail The DS28E04-100 is a 4096-bit, 1-Wire® EEPROM chip with seven address inputs. The address inputs are directly mapped into the 1-Wire 64-bit Device ID Number to easily enable the host system to identify the physical location or functional association of the DS28E04-100 in a multidevice 1-Wire network environment. The 4096-bit EEPROM array is configured as 16 pages of 32 bytes with a 32-byte scratchpad to perform write operations. EEPROM memory pages can be individually write protected or put in EPROM-emulation mode, where bits can only be changed from a 1 to a 0 state. In addition to the memory, the DS28E04-100 has two general-purpose I/O ports that can be used for input or to generate level and/or pulse outputs. Activity registers also capture port activity for state change monitoring. The DS28E04-100 communicates over the single-contact 1-Wire bus. The communication follows the standard Dallas Semiconductor 1-Wire protocol.

Key Features		Applications/Uses
4096 bits of EEPROM Memory Partitioned into 16 Pages of 256 Bits Seven Address Inputs for Physical Location Configuration Two General-Purpose PIO Pins with Pulse-Generation Capability Individual Memory Pages can be Permanently Write-Protected or put in OTP EPROM Emulation Mode ("Write to 0") Communicates to Host with a Single Digital Signal at 15.3kbps or 111kbps Using 1-Wire Protocol Parasitic or VCC Powered Conditional Search Based on PIO Status or PIO Activity Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise Reads and Writes Over a Wide 2.8V to 5.25V Voltage Range from -40°C to +85°C 16-Pin, 150-mil SO Package		Access Products, Optical Network Units, and PBXs Accessory/PCB Identification Autoconfiguration of Modular Systems such as Central-Office Switches, Cellular Base Stations, Access Products, Optical Network Units, and PBXs Autoconfiguration of Modular Systems such as Central-Office Switches, Cellular Base Stations, Access Products, Optical Network Units, and PBXs

Diagram

Typical Operating Circuit

Didn't Find What You Need?

Next Day Product Selection Assistance from Applications Engineers Parametric Search Applications Help

QuickView

Technical Documents

Ordering Info

More Information

Description   Key Features   Applications/Uses   Key Specifications   Diagram

Data Sheet   Application Notes   Design Guides   Engineering Journals   Reliability Reports   Software/Models   Evaluation Kits

Price and Availability   Samples   Buy Online   Package Information   Lead-Free Information

Related Products   Notes and Comments   Evaluation Kits