ENGLISH 简体中文 日本語 한국어  

    Login | Register 


   
 
Enter keywords or part number    



MAX3349E
USB 2.0 Full-Speed Transceiver with UART Multiplexing Mode

Use the Same Connector for USB and UART!


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Status
Active: In Production.

Data Sheet
FULL DATA SHEET (PDF, 708kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The MAX3349E ±15kV ESD-protected, USB transceiver provides a full-speed USB interface to a lower voltage microprocessor or ASIC. The device supports enumeration, suspend, and VBUS detection. A special UART multiplexing mode routes external UART signals (Rx and Tx) to D+ and D-, allowing the use of a shared connector to reduce cost and part count for mobile devices.

The UART interface allows mobile devices such as PDAs, cellular phones, and digital cameras to use either UART or USB signaling through the same connector. The MAX3349E features a separate UART voltage supply input to support legacy devices using +2.75V signaling. The MAX3349E supports a maximum UART baud rate of 921kbaud.

Upon connection to a USB host, the MAX3349E enters USB mode and provides a full-speed USB 2.0 compliant interface through VP, VM, RCV, and OE-bar. The MAX3349E features internal series termination resistors on D+ and D-, and an internal 1.5kΩ pullup resistor to D+ to allow the device to logically connect and disconnect from the USB while plugged in. A suspend mode is provided for low-power operation. D+ and D- are protected from electrostatic discharge (ESD) up to ±15kV.

The MAX3349E is available in 16-pin TQFN (4mm x 4mm) and 16-bump UCSP™ (2mm x 2mm) packages, and is specified over the -40°C to +85°C extended temperature range.

Key Features   Applications/Uses
  • ±15kV ESD HBM Protection on D+ and D-
  • UART Mode Routes External UART Signals to D+/D-
  • Internal Linear Regulator Allows Direct Powering from the USB Cable
  • Separate Voltage Input for UART Transmitter/Receiver (VUART)
  • Internal 1.5kΩ Pullup Resistor on D+ Controlled by Enumerate Input
  • Internal Series Termination Resistors on D+ and D-
  • Complies with USB Specification Revision 2.0, Full-Speed 12Mbps Operation
  • Built-In Level Shifting Down to +1.4V, Ensuring Compatibility with Low-Voltage ASICs
  • VBUS Detection
  • Combined VP and VM Inputs/Outputs
  • No Power-Supply Sequencing Required
  • Available in 16-Bump UCSP (2mm x 2mm) Package

 
  • Cell Phones
  • Digital Cameras
  • MP3 Players
  • PDAs

    Key Specifications:  USB Transceivers
    Part Number VL
    (V)
    Supports USB Speed Internal USB Pullup Resistor ESD Protect.
    (±kV)
    VSUPPLY
    (V)
    Package/Pins Smallest Available Pckg.
    (mm2)
    1.5kΩ max w/pins
    MAX3349E  1.4 to 2.75 Full-Speed Yes 15 4.0 to 5.5
    UCSP/16
    4
    See All USB Transceivers (14)

    Diagram
    MAX3349E: Typical Operating Circuit
    Typical Operating Circuit

    Design Guides
  • Interface (PDF)

    Reliability Reports
  • Reliability Report: MAX3349E.pdf
  • Show FIT data for:

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel;+ = RoHS/lead-free;# = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-2 of 2

    MAX3349E Free
    Sample
    Buy Status
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    MAX3349EEBE+T    
    Active UCSP;16 pin;4 mm²
    Outline Drawing: 21-0101 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: B16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    MAX3349EEBE-T    
    Active UCSP;16 pin;4 mm²
    Outline Drawing: 21-0101 (PDF)
    Land Pattern: Not Available
    Use pkgcode/variation: B16-1*
    -40°C to +85°C RoHS/Lead-Free: No
    Materials Analysis

    Related Products

    More Like This: View Product Families for Similar Products

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    Document Ref.: 19-3952; Rev 0; 2006-10-04
    This page last modified: 2007-09-05


            •         •         •     Privacy Policy     •     Legal Notices

        Copyright © 2009 by Maxim Integrated Products