The MAX1206 is a 3.3V, 12-bit analog-to-digital converter
(ADC) featuring a fully differential wideband track-and-hold
(T/H) input, driving the internal quantizer. The
MAX1206 is optimized for low power, small size, and
high dynamic performance. This ADC operates from a
single 3.0V to 3.6V supply, consuming only 159mW,
while delivering a typical signal-to-noise ratio (SNR) performance
of 68.6dB at a 20MHz input frequency. The
T/H-driven input stage accepts single-ended or differential
inputs. In addition to low operating power, the
MAX1206 features a 0.15mW power-down mode to conserve
power during idle periods.
A flexible reference structure allows the MAX1206 to
use its internal precision bandgap reference or accept
an externally applied reference. A common-mode reference
is provided to simplify design and reduce external
component count in differential analog input circuits.
The MAX1206 supports both a single-ended and differential
input clock drive. Wide variations in the clock
duty cycle are compensated with the ADC's internal
duty-cycle equalizer.
The MAX1206 features parallel, CMOS-compatible outputs.
The digital output format is pin selectable to be
either two's complement or Gray code. A data-valid indicator
eliminates external components that are normally
required for reliable digital interfacing. A separate power
input for the digital outputs accepts a voltage from 1.7V
to 3.6V for flexible interfacing with various logic levels.
The MAX1206 is available in a 6mm x 6mm x 0.8mm, 40-
pin thin QFN package with exposed paddle (EP), and is
specified for the extended industrial (-40°C to +85°C)
temperature range.
Refer to the MAX1209 and MAX1211 (see Pin-Compatible
Higher/Speed Versions table) for applications that require
high dynamic performance for IF input frequencies.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-4 of 4
MAX1206
Free Sample
Buy
Status
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX1206ETL
Active
TQFN;40 pin;37.2 mm²
Outline Drawing: 21-0141 (PDF)
Land Pattern: 90-0054 (PDF)
Use pkgcode/variation: T4066-3*
Download
E-Mail