TFT-LCD DC-DC Converters with Operational Amplifiers
TFT-LCD DC-DC Converters Include a High-Performance Step-Up Regulator, Two Linear-Regulator Controllers, and High-Current Operational Amplifiers for Active-Matrix Thin-Film Transistor (TFT) Liquid-Crystal Displays (LCDs)
Active: In Production. But some versions of the family are Not Recommended for New Designs. See Ordering Information.
MAX1518
This product is Not Recommended for New Designs.
Description
The MAX1516/MAX1517/MAX1518 include a high-performance step-up regulator, two linear-regulator controllers, and high-current operational amplifiers for active-matrix thin-film transistor (TFT) liquid-crystal displays (LCDs). Also included is a logic-controlled, high-voltage switch with adjustable delay.
The step-up DC-DC converter provides the regulated supply voltage for the panel source driver ICs. The converter is a high-frequency (1.2MHz) current-mode regulator with an integrated 14V n-channel MOSFET that allows the use of ultra-small inductors and ceramic capacitors. It provides fast transient response to pulsed loads while achieving efficiencies over 85%.
The gate-on and gate-off linear-regulator controllers provide regulated TFT gate-on and gate-off supplies using external charge pumps attached to the switching node. The MAX1518 includes five high-performance operational amplifiers, the MAX1517 includes three, and the MAX1516 includes one operational amplifier. These amplifiers are designed to drive the LCD backplane
(VCOM) and/or the gamma-correction divider string. The devices feature high output current (±150mA), fast slew rate (13V/µs), wide bandwidth
(12MHz), and rail-to-rail inputs and outputs.
The MAX1516/MAX1517/MAX1518 are available in 32-pin thin QFN packages with a maximum thickness of 0.8mm for ultra-thin LCD panels.
