The MAX4908/MAX4909/MAX4930/MAX4932 dual 3:1
clickless audio multiplexers feature negative-signal
capability that allows signals as low as VCC - 5.5V to
pass through without distortion. These analog multiplexers
have a low on-resistance (0.38Ω), low supply current,
and operate from a single +1.8V to +5.5V supply.
The MAX4908 has shunt resistors on all input terminals,
and the MAX4909 has shunt resistors on all input terminals
except X0 and Y0. The MAX4930 has shunt resistors
only on the X2 and Y2 terminals, and the MAX4932 has
no shunt resistors. The shunt resistor feature reduces
click-and-pop sounds by automatically discharging the
capacitance at the input terminal when they are not connected.
A break-before-make feature further reduces
popping.
The MAX4908/MAX4909/MAX4930/MAX4932 use two
digital control inputs CB1 and CB2 to switch between signals.
The digital control inputs can accept up to +5.5V
independent of the supply voltage.
The MAX4908/MAX4909/MAX4930/MAX4932 are available
in 12-bump WLP and 14-pin TDFN-EP packages
and operate over the -40°C to +85°C extended temperature
range.
Key Features
Applications/Uses
Distortion-Free Negative Signal Throughput Down to VCC - 5.5V
